Your window shutter won’t move: what should you check before calling?
A few safe checks sometimes solve the problem. They also help us know which part to bring.
- Stop operating it. Pulling on a strap that catches or pressing the switch again and again almost always makes things worse.
- Check the circuit breaker. On an electric shutter, a tripped breaker or a power cut explains a shutter that does nothing at all.
- Change the batteries in the remote and try the wall switch if there is one.
- Wait a few minutes. After several runs up and down in a row, the motor’s thermal protection cuts it out while it cools.
- Take a photo of the shutter (from outside if you can) and call +33 7 68 20 39 55.
What are the most common window shutter faults?
Six faults are the most common on a window roller shutter. What you can see already points to the diagnosis.
Stuck up, down or at an angle
A fixing between the curtain and the axle has snapped, a slat has slid sideways or a guide rail is bent. The curtain tilts and jams.
Sign: one side drops lower than the other, or the shutter always stops at the same point.Broken strap or strap that won’t rewind
On a manual shutter, the strap frays over time and the winder spring eventually gives way. With a crank handle, it is the gear winder that wears.
Sign: a slack strap that hangs down or no longer winds back into its box.Broken slat or slat out of its rails
A gust of wind, a knock or a cracked slat is enough to pull the curtain out of its rails. On the coast, the westerly wind is a classic cause.
Sign: a slat sticks out, bends or lets light through.Motor that no longer responds
The tube motor, housed inside the axle, may be in thermal cut-out, have misadjusted limit switches or be at the end of its life.
Sign: a click or a hum with no movement, or no sound at all.Remote or switch does nothing
Batteries, lost pairing with the radio receiver, a worn up/down switch: the command no longer reaches the motor.
Sign: the shutter obeys the switch but not the remote, or the other way round.Shutter that lowers by itself
The motor brake, the winder of a crank-operated shutter or the strap reel no longer holds the weight of the curtain.
Sign: the shutter slowly creeps down after being raised.How does a window roller shutter repair work?
A repair always follows the same order: understand the fault over the phone, diagnose it on site and give the price, then repair it with your agreement.
- 1Call the technicianYou describe the shutter: manual or electric, strap or crank, box inside or outside, what happened. A photo helps a lot.
- 2Diagnosis and price on siteThe technician opens the box, checks the axle, fixings, slats and motor, then gives you the price before any work starts; the call-out charge depends on the distance from our base in Gruchet-le-Valasse and is given to you together with the price of the job.
- 3Repair, with your agreementNothing is done without your go-ahead: once you accept the price, the faulty part is replaced.
- 4Tests and adjustmentSeveral full cycles, limit switches adjusted on an electric shutter, then an itemised invoice.
Common parts (straps, strap winders, fixings, slats, tube motors) are carried in the van. If a part is missing, the shutter is left in a safe position and the repair is booked as soon as the part arrives.
Manual or electric window shutter repair: what is the difference?
On a manual shutter, the repair is mainly on the operating gear: strap, strap winder, gear winder, crank rod. On an electric shutter, it concerns the motor, its settings and its controls. The curtain, guide rails and axle are common to both.
| Fault | Manual shutter | Electric shutter |
|---|---|---|
| Won’t go up | Broken strap, worn strap or gear winder | Motor, capacitor, limit switch, controls |
| Lowers by itself | Winder that no longer holds | Worn motor brake |
| Stuck at an angle | Snapped fixing, shifted slat, bent guide rail | |
| Broken slat | Replacement of the slat or bottom slat | |
Shutter types are explained on our pages on the manual window roller shutter and the electric window roller shutter.
A manual shutter that keeps breaking its strap may also be a reason to go electric: see our page on motorising a window roller shutter. On a solar shutter, the fault sometimes lies with the panel or battery rather than the motor: read our page on the solar window shutter.
Should you repair or replace your window shutter?
In most cases a repair is enough: a strap, a slat, a fixing or a motor can be changed without touching the rest. Full replacement makes sense when the curtain is bent along its whole height, the guide rails are eaten away by corrosion or the box is damaged.
- Repair: a single part is at fault and the curtain is sound.
- Replace the curtain: several slats are cracked or faded, but the box and rails are fine.
- Replace the shutter: the whole unit is worn or poorly suited to the window. See window roller shutter installation and the retrofit window shutter.
The technician tells you honestly what makes most sense, without pushing you towards a new shutter.
How much does it cost to repair a window roller shutter?
The price depends on the fault, the part and access to the box: the technician gives it to you on site, once the diagnosis is done and before starting the work.
Price given on site before any work, itemised invoice at the end. For a repair call-out there is no free quote: if you decline the work after the diagnosis, only the call-out is charged. The reasoning is the same as for our shop shutters: how the price of a repair is set.
- The part: a strap or a fixing is not the same as a tube motor.
- Access: an indoor box opens from the room, an outdoor box on an upper floor sometimes needs a ladder or scaffolding.
- Number of shutters: several repairs during the same visit.
- Time of day: a surcharge applies at night (8 pm to 8 am), on Sundays and on bank holidays; it is included in the price the technician gives you on site, before any work starts.
Where do we repair window shutters?
We work for homeowners, shops and offices across the five Normandy départements, from our base in Gruchet-le-Valasse. Window shutter repair is available 24/7, including nights, weekends and bank holidays.
To stop the fault coming back, regular cleaning and adjustment make all the difference, especially near the sea: see window roller shutter servicing. The full range is on our window roller shutters page. A shop shutter that has broken down? That is our emergency roller shutter repair service.
