How does a sectional garage door work?
The door is divided into several horizontal panels joined by hinges. As it opens, rollers fixed to the sides run in two tracks: first vertical, along the reveals, then curving round to run horizontally under the ceiling. The panels follow the curve one by one and come to rest flat above the car.
The weight of the door is counterbalanced by torsion springs on a shaft above the opening, or by extension springs along the tracks, depending on the model. Cables link the bottom of the door to the drums on the shaft: this balance makes the door light by hand and spares the motor.
Springs and cables are under high tension at all times. Never adjust them yourself: a broken spring or a cable off its drum must be dealt with by a technician. See garage door repair.
What are the pros and cons of a sectional door?
Its great strength is that it takes no space in front or at the sides; its main requirement is a clear ceiling. Here is the assessment before you choose.
| Strengths | Weaknesses |
|---|---|
| Vertical opening: park right up to the door, nothing sticks out onto the pavement | Needs enough headroom above the lintel and ceiling depth |
| Double-skinned panels with insulating foam on many models | Tracks under the ceiling: no hanging storage in that area |
| Seals all round and under the bottom panel: fewer draughts and less water | More moving parts (rollers, hinges, cables) to keep an eye on than an up-and-over |
| Wide choice of looks: ribbed, cassette, flush panels, windows, colours | A dented panel can catch in the curve of the tracks |
Cluttered or low ceiling? Compare with the roller garage door or the side-sliding door.
Is a sectional garage door well insulated?
It can be, and it is one of the best choices for a garage attached to the house, provided you choose insulated panels and pay attention to the seals. Insulation depends on panel thickness, the foam injected between the two steel skins and, above all, airtightness: bottom seal, side seals and lintel seal. In Normandy these seals work hard (wind-driven rain, salt on the coast): a crushed seal lets in more air than a slightly thinner panel.
What options are there for your sectional door?
Three choices shape everyday use: operation, pedestrian access and safety.
We supply and fit new sectional garage doors, chosen from the leading brands on the market and made to measure to the dimensions taken by the technician. The model, insulation, appearance and manufacturing lead time are set out in the quote; we also repair and service sectional doors of all makes.
How is a sectional garage door fitted?
Everything starts with a site survey, which is free, because a sectional door comes down to measurements: width and height of the opening, headroom above the lintel, ceiling depth and side room to the left and right. Then come the detailed quote, fitting the tracks and panels, tensioning the springs, adjusting the motor and safety devices, and testing with you.
The whole process, from removal to handover, is on the garage door installation page.
What faults affect a sectional garage door?
The most common faults are a broken torsion spring, a cable off its drum and a roller knocked out of its track. A door that leans or becomes heavy: stop using it and call.
We work all over Normandy, from Rouen to Caen, on sectional garage doors. For large doors on business premises, see the industrial sectional door. All the other doors are presented on our garage doors and residential doors page.
