Technicians available now Call-outs across Normandy 24 hours a day, 7 days a week Price given on site, before any work
5.0 on Google
Technicians available now · 24/7

New roller shutter cost: what goes into the quote

The cost of a new roller shutter depends on its size, the type of curtain, manual or motorised operation, the finish, the locking and the fitting conditions. DEPANN'Rideaux prices it after a site survey and gives you a written quote, itemised line by line, before anything is ordered.

  • 24/7nights and bank holidays
  • Price given on sitebefore any work
  • All brandsparts in stock

What makes the cost of a new roller shutter vary?

The cost of a new roller shutter depends on eight things: the size of the opening, the type of curtain, how it is operated, the finish, the locking, what can be kept, removing the old shutter and access to the site. A roller shutter is made to the measurements of your shopfront: there is no single price, but a series of choices that the quote should set out in detail.

1. The size of the opening

Width and height set the area of the curtain, and therefore the number of slats and the weight to be lifted. That weight determines the strength of the springs on a manual shutter, or the power of the motor on a motorised one. Wide openings are usually fitted with a central motor, placed in the middle of the axle; narrower openings can take a tube motor, housed inside the axle. The headroom above the opening also matters: it decides the size and position of the shutter box.

2. The type of curtain

The curtain is the set of slats. Each profile has its own manufacturing cost and fitting constraints:

  • Solid slats: maximum opacity and strength, for a shop, a stockroom or a warehouse.
  • Micro-perforated slats: the shop window stays visible after closing, and light and air pass through.
  • Tube and link grille: maximum visibility while keeping the premises closed.
  • Collapsible gate: opens sideways, concertina-style, with no shutter box at the top.

3. Manual or motorised

A manual shutter works with spring boxes that balance the weight of the curtain. The motorised version adds the motor, its brake, the limit switches, the control (key switch, remote control, switch) and, on some central motors, a manual override using a winch or crank. It also needs a power supply nearby. See our page electric roller shutters.

4. Material and finish

Plain galvanised steel, steel lacquered in the colour of your shopfront, aluminium: the finish changes the price, the appearance and the resistance to corrosion. That last point matters on the Normandy coast, where salty air attacks poorly protected metal faster, for example in Le Havre, Dieppe or Cherbourg. Lacquering in a particular colour can also lengthen the manufacturing time.

5. Locking and security

Central lock, side bolts, reinforced bottom slat, anti-lift locks, reinforced guide rails: each option improves resistance to break-ins and is added to the quote. The right level depends on your exposure: a window on a busy street, valuable stock, isolated premises. See our page roller shutter locks.

6. What can be kept

If the shutter box, the axle and the guide rails are sound and compatible, it is sometimes possible to change only the curtain or the motor. Conversely, bent guide rails or a damaged support mean everything has to be redone. The site survey is what tells you which.

7. Removing and disposing of the old shutter

If there is an old shutter in place, removing it is shown on the quote. Taking it away, recycling included, is included when a new shutter is fitted: you do not have to deal with it.

8. Access and fitting conditions

Face-fixed or fitted within the reveal, working height, narrow pavement, pedestrian street with restricted delivery hours, masonry to be made good, a power supply to be run to the motor: each constraint adds time or materials. The quote states what is included and anything that may remain your responsibility.

How does the site survey before the quote work?

The site survey is free and with no obligation: a technician comes to measure the opening and identify the fitting constraints, which allows a reliable price rather than an estimate. Allow 30 min to 1 hour on site. The technician checks:

  1. 1The measurementsWidth and height of the opening, headroom for the shutter box, depth of the reveals.
  2. 2The supportThe condition of the masonry or structure to which the guide rails and brackets will be fixed.
  3. 3The electricsWhether there is a power supply nearby for a motorised shutter.
  4. 4How you use itHow often it is opened, the need for visibility, exposure to break-ins and wind.
  5. 5What is already thereWhether the shutter box, axle or guide rails can be kept, or everything needs to be removed.

If you are torn between two options, solid or micro-perforated slats, manual or motorised, ask for both versions on the quote: you will see what each choice changes. For a shutter made to the exact measurements of your shopfront, see also made-to-measure roller shutters and our roller shutter installation service.

What should a quote for a new roller shutter contain?

A proper roller shutter quote describes the product, the fitting, the timescale and what is not included precisely. Whoever the installer is, check before signing that it states:

  • the dimensions used (width, height) and the fitting method;
  • the type of curtain, the material and the finish, with the colour if it is lacquered;
  • the operation: springs, or a motor with its type (central or tube), its control and whether there is a manual override;
  • the accessories: lock, bolts, shutter box, bottom slat;
  • removal and disposal of the old shutter, if needed;
  • what remains your responsibility: masonry, power supply, permissions;
  • the manufacturing lead time and how long fitting takes;
  • the payment terms and the warranty on the equipment and the fitting.

Before changing your shopfront: replacing a shutter changes the outside appearance of the premises. Check with your landlord, the building’s co-owners and the town hall (mairie) whether permission is needed, especially in an old town centre or a protected area.

How do you compare two roller shutter quotes?

Compare two quotes line by line, for the same dimensions and the same equipment: a lower total means nothing if the two offers do not describe the same shutter. Ask yourself these questions:

  • Are the measurements the same? A quote drawn up without measuring on site is based on an estimate that may change when you order.
  • Is the curtain the same? Same slat profile, same material, same finish.
  • Is the motor sized for the weight of the curtain? An undersized motor overheats, cuts out on its thermal protection and wears out faster.
  • Is a manual override included? On motors that have one, it lets you open or close during a power cut.
  • Are removal, disposal and adjustments included? Or will they appear later as extras?
  • Who does the fitting? The company that signs the quote, or a subcontractor you do not know?
  • What warranty, and who provides it? For the equipment, for the fitting, and who comes out if it breaks down.

Be wary of a price well below the others: it often hides an undersized motor, a different finish or fitting without making good the support. Also ask who will handle repairs after fitting: an installer who also does emergency call-outs already knows your shutter.

What lead times, deposit and warranty for a new shutter?

Once the quote is accepted, allow 2 to 4 weeks for manufacture, then half a day to a full day for fitting on site. Payment is made in two stages: 30% deposit when you order, the balance on installation.

  1. 1Site surveyMeasurements, fitting constraints, choice of curtain and operation.
  2. 2Written, itemised quoteEach item on its own line, with the lead time and the warranty.
  3. 3OrderQuote accepted and deposit paid.
  4. 4ManufactureTo the measurements taken, in the chosen finish.
  5. 5Fitting and commissioningRemoval of the old shutter if needed, fitting, adjustments, tests and an explanation of how to use it.

You pay by bank card, bank transfer or cheque. A new roller shutter fitted by DEPANN'Rideaux is guaranteed for 2 years; for a motor replacement alone, the warranty is 2 years on the motor (manufacturer's warranty) and 1 year on fitting. If your current shutter is out of action until the fitting, we can make the premises secure in the meantime.

Should you repair or replace your roller shutter?

It is better to repair as long as the curtain, the axle and the guide rails are sound, and to replace when faults keep recurring or the structure itself is worn. This table helps you decide:

SituationRather repairRather replace
A few slats bent after an impactYes, slat by slatIf the whole curtain is distorted
Broken springYesIf the axle and guide rails are also worn
Motor failureRepair or a new motorIf the curtain is at the end of its life
Advanced corrosion of the slatsRarelyYes, corrosion spreads
Repeated breakdownsAfter diagnosisIf one repair follows another
Need for visibility or a motorMotorise the existing shutterChange the curtain (micro-perforated, grille)

To understand how the price of a repair is set, read our guide to the cost of a roller shutter repair and the page roller shutter repair. If your manual shutter is in good condition, motorising a manual shutter saves changing the whole unit. For a complete change, see full replacement.

Which roller shutter should you choose for your business?

The right shutter is the one that suits your opening hours, your shop window and your exposure to risk, not necessarily the most expensive one. A few pointers:

A motorised shutter installed in a workplace must then be maintained: the regulations require an inspection at least every six months. Details in our article on mandatory roller shutter maintenance. We fit new shutters in Rouen, Caen, Évreux and throughout Normandy.

Frequently asked questions

Cost of a new shutter: your questions

Can you keep the shutter box and guide rails and change only the curtain?

Yes, if the guide rails, the axle and the shutter box are in good condition and compatible with the new curtain. The site survey checks this, and the quote takes it into account.

Can you get the price of a new shutter over the phone?

No: we never give prices over the phone. A new shutter is made to the measurements of your opening, and the support, the electrics or access change the fitting. The call is for describing your project and booking the site survey, which is free: the quote is given to you after that visit on site, with no obligation.

Are removal and disposal of the old shutter included?

Taking the old shutter away, recycling included, is included with a new shutter. Removing it appears on the quote, on a separate line: you know exactly what the full replacement covers.

How long should you allow between the quote and the fitting?

Allow 2 to 4 weeks for manufacture after the quote is accepted, then half a day to a full day for fitting on site. If your current shutter is out of action, we make it secure until the fitting.

Is it better to buy a manual shutter and motorise it later?

It is possible, but planning for the motor at the time of fitting avoids having to rework the axle and the power supply later. If you open and close several times a day, a motorised shutter is generally the most convenient choice.

Planning a new roller shutter?

Call: a technician will come and measure your opening, with no obligation, and give you a written, itemised quote, anywhere in Normandy.