Why choose a steel door rather than timber or PVC?
For its strength: a metal door does not swell with damp, does not split and takes a kick or a crowbar better than a timber or PVC leaf. That counts in Normandy, where doors spend the winter in rain and westerly winds.
A steel door can be a front door, a service door or a pedestrian garage door. This page is about the material; for opening method and uses, see the hinged door, and for resistance to break-ins, the security door.
Steel or aluminium door: which should you choose?
Steel is the toughest, aluminium the lightest and the least prone to corrosion. The right choice depends on how exposed the door is and what you expect from it.
| Criterion | Steel | Aluminium |
|---|---|---|
| Impact resistance | Very good, rigid leaf | Good, but dents more easily |
| Weight | Heavy: sturdy hinges and frame essential | Light: smoother operation, less wear on hinges |
| Corrosion | Rusts if the coating is scratched: galvanising and powder coating needed | Does not rust; oxidises on the surface, hence the value of a coating |
| Typical use | Service door, plant room, door exposed to knocks | House front door, seafront façade |
Both metals come in insulated versions. The final choice is made on site.
Is a steel door well insulated?
Yes, if it is designed to be: an insulated steel door is made of two skins enclosing an insulating core (polyurethane foam or mineral wool), with seals all round the frame. A single plain sheet, on the other hand, lets the cold through and can mist up with condensation inside.
On aluminium, look for a thermally broken profile: an insulating strip separates the outer face of the frame from the inner face.
Which finish for a metal door in Normandy?
In Normandy, the finish is first and foremost protection. On the coast, from Le Havre to Dieppe by way of Fécamp, salt air attacks bare metal within a few seasons.
DEPANN'Rideaux fits new metal doors, in steel or aluminium, chosen from the ranges of leading brands on the market, and repairs existing metal doors of all brands (lock, hinges, seals). The model, the finish and the fitting lead time are set out in the quote, issued after the on-site survey.
How is a steel door fitted?
Fitting a steel door comes down to accurate measurements and a well-fixed frame: a plumb frame means a door that closes properly for years.
- 1Site surveyMeasuring the opening, condition of the wall and old frame, opening direction, exposure. The survey is free.
- 2Detailed quoteMetal, insulation, finish, lock and fittings set out in writing.
- 3Removal and fittingOld door removed, frame fixed and packed, leaf hung, seals and sealing.
- 4AdjustmentHinges and strike adjusted, weathertightness checked, keys handed over.
For a garage door, the steps and constraints are different: see garage door installation.
What should you do when a steel door is damaged?
A metal door can often be repaired rather than replaced: hinges reset, lock replaced, seals renewed, rust spots treated before they eat through the sheet. The door is only replaced if the leaf is too bent to close, or if corrosion has gone right through.
After an attempted break-in, what to do (secure the entrance, then repair, reinforce or replace) is set out on the security door page; you receive a detailed invoice for your insurer, just as for a shutter forced in a break-in. We also work in Rouen and throughout Normandy. See all our doors on the residential doors page.
