Your shutter has been forced: what should you do?
In the first few hours, the order in which you do things matters as much as the repair: it affects the police report and the insurance claim.
- Do not go in if you have any doubt. If the intruder may still be inside, move away and call 17 (the French police).
- Do not touch anything before the police report if you are pressing charges. Shutter, lock, handles, shop window: leave the marks as they are until the police or gendarmerie have been.
- Photograph everything. The shutter from a distance then close up, the lock, the slats, the guide rails, the inside. Your phone dates the photos.
- Tell your insurer within the time limit set in your policy, and ask whether they want to send an assessor before repairs are made.
- Call +33 7 68 20 39 55. We arrange for the securing to take place after the police report.
How can you tell if a roller shutter has been forced?
A forced shutter shows tool marks and localised distortion, most often at the bottom of the curtain or around the lock. Some attempts fail and go unnoticed until the next time the shutter is operated.
Lock attacked
Cylinder torn out, drilled or broken, a key that will no longer go in or turns with no effect.
Sign: metal shavings, a distorted keyhole.Bottom slat lifted
A lever slid under the shutter lifts the bottom slat and bends the slats just above it.
Sign: the bottom of the shutter is buckled, with a gap visible at floor level.Guide rails spread
The side rails have been bent to pull the curtain out.
Sign: slats sticking out on one side, a shutter that jams.Bolts or controls torn off
Side bolts bent, key switch torn off or cable cut to disable the motor.
Sign: exposed wires, no control responds.If the damage is mainly to the curtain, our bent or broken slats page describes the repairs available.
Why secure the premises on the day of the break-in?
Because a shop that no longer closes is exposed to a second visit, and the culprits now know its weak point. Closing the premises protects what is left of the stock and limits further damage, which your insurer may require of you: check with them.
If the shutter cannot be repaired straight away, we close it temporarily: locking, locking it out of use or temporary closure. All these solutions are described on our page making your shop secure after a break-in. If you discover the break-in at night, see also our night roller shutter repair.
What documents do we give you for the insurance?
We give you a detailed invoice and photos of the damage, before and after the work: two things that help with your insurance claim.
- The detailed invoice: date and time of the call-out, description of the damage found, parts replaced, labour, any temporary securing.
- The photos of the shutter, the lock and the slats, taken by the technician when he arrives and after the work, which are handed to you.
- A separate written quote for the permanent repair or reinforcement, if this work is done later.
- The parts replaced, which are handed to you, so your insurer or the assessor can examine them.
The time limit for making a claim and the conditions of cover depend on your policy: only your insurer can confirm them.
Should you repair or reinforce the shutter after a break-in?
First repair what gave way, then reinforce the weak point that was exploited: a shutter put back exactly as it was remains just as vulnerable as before. The technician suggests reinforcements suited to your shutter, carried out on a quote.
- Lock: replacing the cylinder or the central lock with a model more resistant to drilling and pulling. See our roller shutter locks service.
- Bolts: adding side bolts or floor bolts to stop the bottom slat being lifted.
- Slats: replacing bent slats, a reinforced bottom slat.
- Guide rails: straightening or replacement so the curtain can no longer be pulled out of its guides.
- Controls: a better-protected key switch, the cable put back in a sleeve and out of reach.
How much does it cost to repair a forced roller shutter?
The cost depends on the extent of the damage; the technician gives you the price on site, once the diagnosis is done and before any work starts. Nothing goes ahead without your agreement.
Price given on site, before the work. On the phone, describe the damage to the technician and send him a photo: he brings the right parts and tells you when he will arrive. On site, he makes the diagnosis and gives you the price for securing the premises before he starts; if you decline the work after the diagnosis, only the call-out is charged. How the price of a repair is set.
What makes the price vary?
- The extent of the damage: a lock attacked on its own does not need the same work as bent slats, a bottom slat torn off and spread guide rails.
- The parts to replace: cylinder, central lock, slats, guide rail or control box come on top of the securing.
- The reinforcements you choose: anti-lift bolts, a stronger lock or a reinforced bottom slat are offered on a quote.
- The time of day: a break-in discovered at night, on a Sunday or on a bank holiday means a call-out with a surcharge.
- The distance: the call-out charge depends on the distance from our base in Gruchet-le-Valasse and is given to you together with the price of the job.
Payment is by bank card, bank transfer or cheque, with no cash required, and every item appears on the detailed invoice provided for your insurer.
Where do you come out after a break-in?
Anywhere in Normandy, by day and by night, including Rouen, Le Havre, Évreux and Elbeuf. For other faults, see the emergency roller shutter repair in Normandy page.
