Why service a window roller shutter?
Because most window shutter faults start with dirt or a slight misadjustment. A clogged guide rail makes the curtain rub, the motor strains, the strap wears faster and a fixing eventually gives way.
Regular roller shutter servicing stops that chain of events. It also preserves the insulation of the box, the draught-proofing and the look of the slats. In Normandy, two factors speed up wear: humidity, present for much of the year, and salt air all along the coast, from Dieppe to Mont-Saint-Michel.
How do you clean a roller shutter yourself?
A roller shutter is cleaned with warm water and mild soap, using a sponge or soft brush with the shutter lowered, then rinsed with clean water. Nothing more: harsh products dull the lacquer and damage PVC.
- 1Lower the shutterSlats flat, leaving the gaps open if the curtain has them, so you can clean between the slats.
- 2Wash the slatsSoapy water, from top to bottom, without scrubbing with an abrasive pad.
- 3RinseWith clean water from a gentle hose. Avoid pressure washers, which force water into the box and lift the seals.
- 4Clean the guide railsVacuum out leaves, sand and cobwebs, then wipe the inside with a damp cloth.
- 5Dry and operateRaise the shutter once dry, listening for any rubbing.
Should you grease the guide rails? No: grease holds dust and sand. If the curtain still rubs once clean, a light spray of dry silicone lubricant in the rails is enough.
How often should a roller shutter be serviced?
Cleaning at least once a year suits most shutters. Near the sea, or on a façade exposed to spray and wind, it is better to rinse slats and rails several times a year, especially after winter storms.
| Situation | Recommended cleaning | Why |
|---|---|---|
| Shutter in town or sheltered | Once a year | Dust and pollution in the rails |
| Coast (Le Havre, Fécamp, Dieppe, Calvados coast, Cotentin) | Several times a year | Salt builds up, eats into fixings and makes the rails stick |
| Façade very exposed to wind | After every strong gale | Leaves, branches, shifted slats |
For shutters on business premises by the sea, a technician’s visit comes on top of this cleaning.
Why does my roller shutter squeak or rub?
A squeaking shutter most often has dirty or dry guide rails, a shifted slat or something rubbing inside the box. Start by cleaning the rails: if the noise continues, it is coming from inside the box and the technician needs to take a look.
- Noise all the way up and down: clogged or bent guide rails.
- Knock in the lowered position: misadjusted limit switch or damaged bottom slat.
- Rubbing on one side only: a slat that has slid sideways or a broken fixing.
- Motor growling: the motor is straining and should be checked.
If the shutter jams, tilts or lowers by itself, it is no longer a servicing matter: see our page on window roller shutter repair.
What does the technician check during a servicing visit?
The technician opens the box and checks what you cannot see: the axle, the fixings, the motor or the operating mechanism, then adjusts and tests the shutter.
Curtain and guide rails
Cracked or shifted slats, the bottom slat, end caps, straightness and fixing of the rails.
Aim: a curtain that comes down straight.Box, axle and fixings
Condition of the roller axle, the fixings that join the curtain to the axle, and the bearings.
Aim: to spot a tired fixing before it breaks.Motor and controls
Tubular motor operation, limit switch adjustment, switch, remote control, timer.
Aim: a clean stop at the top and bottom.Manual operation
Wear on the strap and its winder, or on the gear winder and crank rod.
Aim: to change the strap before it snaps.At the end, the technician tells you what to keep an eye on. If a part needs changing, he gives you the price on site before doing the work: nothing is replaced without your agreement.
Is a roller shutter servicing contract worthwhile?
For a house, regular cleaning and a call if there is a noise are often enough. A contract becomes worthwhile when there are many shutters, motorised and centrally controlled, or fitted to offices, a practice or commercial premises.
DEPANN'Rideaux offers a servicing contract for window roller shutters, along the lines of the one for shop roller shutters: inspection visits, cleaning, adjustment and motor checks. The number of visits and the exact content are set out in the contract, according to your shutters.
For shop shutters, our roller shutter maintenance contract explains what the regulations require in workplaces. Our practical tips are also gathered in the roller shutter maintenance guide, much of which applies to a window shutter too.
How much does a servicing visit cost?
The price depends on the number of shutters, their type and access to the boxes: the technician gives you the price on site, after looking at the shutters and before any work starts. On the phone, you describe your shutters and agree on a day for the visit. Grouping all the shutters in the house into one visit keeps the cost per shutter down.
Where do we service window roller shutters?
Throughout Normandy, in Caen as well as along the coast, where salt air wears shutters out faster:
A tired manual shutter can also go electric: see motorising a roller shutter and the electric window roller shutter. The full range is on the window roller shutters page.
