Why have your garage door installed by a technician?
Because a garage door is a heavy assembly balanced by springs under high tension: the slightest fitting error leads to breakdowns, motor wear or even accidents. A badly fixed or badly balanced door rubs in its tracks, rises crooked and tires its springs; a badly set motorised door may not stop for an obstacle.
The technician who fits your door is also the one who repairs it later: he knows every setting, and you keep the same point of contact for servicing and repairs. That is the difference from a door bought online and fitted by a third party with no follow-up.
Which door suits your garage?
The choice depends on the space on the ceiling and at the sides, how you use the garage and the look of the house. Each type has its own page:
- Up-and-over doorA single pivoting panel, often replaced like for like.
- Sectional doorHinged panels that run up under the ceiling.
- Roller doorSlats rolled into a box, ideal if the ceiling is cluttered.
- Side-sliding doorThe door slides along an inside wall.
Dimensions, materials, insulation and colour are chosen with the technician: see our made to measure garage door page.
How does garage door installation work?
Installation always follows the same order, from the survey to handing over the keys and remotes.
- 1Site surveyMeasuring, checking the lintel, walls and floor, locating the power supply and ceiling obstacles (beams, lights, pipes).
- 2Preparing the siteThe fitting area in the garage is cleared. The car is moved out and access is protected.
- 3Removing the old doorThe springs are safely released, then the old door, tracks and fixings are dismantled.
- 4Fitting the frame and tracksFixed plumb and level on sound supports; if the support is weak, masonry or lintel repair is itemised in the quote, carried out by us or coordinated with a partner tradesman.
- 5Assembling and balancing the doorThe door is assembled, then the springs are tensioned until it holds still at half height.
- 6Motor and safety devicesFitting the motor, photocells and controls, setting the limit switches and obstacle detection.
- 7Tests and handoverFull cycles, safety tests, manual release demonstration, remote programming, maintenance advice.
How long the job takes depends on the door type, the removal and any extra work: it is stated on the quote.
What happens to the old garage door?
The technician dismantles it, starting by releasing its springs: the most dangerous step of any removal, never to be done yourself. An old up-and-over door with side springs or a sectional door with torsion springs still stores a lot of energy, even if it no longer works. When a new door is fitted, the old one is taken away and recycled: disposal included.
What fitting options are there for a garage door?
The most common fitting is behind the opening, on the inside, with the door sitting against the front wall: it keeps the full width of the opening. When there is not enough room behind the lintel or at the sides, other options exist, within the opening or with an external box for a roller door. The technician chooses the right fitting during the survey, based on side room, headroom above the opening and ceiling height.
Older house, shared car park or lock-up: what changes?
Older house
Normandy longères, barns and outbuildings have irregular openings and flint, brick or cob walls: fixings and any lintel repair are itemised in the quote.
Plan for: a power supply if the door is motorised.Shared car park
A shared car park door operates far more often: motor, springs and safety devices must be sized for that heavy use.
Plan for: the managing agent’s approval and handling residents’ remotes.Rented garage or single lock-up
Strength and locking come first: a sturdy up-and-over or roller door, a reliable lock, like-for-like replacement where possible.
Plan for: the number of keys or remotes per tenant.Can you fit a garage door I bought myself?
Yes, we also fit garage doors supplied by the customer. Talk to us before you order: we need to know the model, its dimensions and its instructions to check that it can be fitted in your opening. The fitting quote is given after the site survey, which is free.
What is checked when a garage door is commissioned?
A motorised door must meet the safety requirements of EN 12453: during testing, we check that it stops and reverses when it meets an obstacle. Keep the instructions and documents handed over at fitting. Product standards and planning permission are covered on the garage doors and residential doors page.
After fitting, regular greasing and checks, especially in a damp garage or one exposed to salt air, prevent most breakdowns; that is the principle of the servicing we offer for roller shutters.
How much does garage door installation cost?
The price depends on the door chosen, removing the old one, the motor and the condition of the masonry: it is set in a written quote, after the survey.
Free site survey and quote. The quote itemises the door, removal, fitting, motor and any extra work, before anything is ordered.
Where do we install garage doors?
In all five Normandy departments, including Rouen, Le Havre, Caen and Cherbourg. To motorise a door you are keeping, see garage door motors; for a breakdown, see our garage door repair page. All our doors for the home are on the residential doors page.





