Changing a roller shutter motor is never our knee-jerk answer. We repair for as long as it is reliable. But when the motor itself is at fault, persisting costs more than a replacement done properly: repeated call-outs, days of closure, the risk of being stuck one evening. Here is how to recognise that point, how we choose the new motor and how the job goes.
When does a roller shutter motor need replacing?
The motor needs replacing when a repair is no longer enough to guarantee reliable operation. The clearest signs are:
- Grinding or knocking noises from the motor, a sign of a worn gearbox.
- A motor that overheats and cuts out on every cycle, even though the curtain slides freely.
- Burnt-out windings, often with a burning smell.
- A worn brake that lets the curtain slip and whose parts are no longer available.
- Parts that cannot be found for an old motor or a model no longer made.
- Repeated repairs over a short period, which end up costing more than a new motor.
- A motor that was undersized from the start, or has become too weak after the slats were changed.
Before drawing a conclusion, we always carry out a full diagnosis: a capacitor, limit switches or a receiver can mimic a motor fault. Our method is described on the roller shutter motor repair page.
How is the new motor sized?
The new motor is chosen on its torque, calculated from the weight of the curtain and the diameter of the axle, not simply copied from the old one. The old motor may have been badly chosen in the first place, or the shutter may have changed since.
| Criterion | What the technician checks |
|---|---|
| Weight of the curtain | Area, type of slats (solid, micro-perforated, tube and link) and material |
| Axle | Diameter, straightness, condition of the brackets and bearings |
| Use | Number of openings a day, need for a heavy-duty motor |
| Power supply | Single-phase or three-phase, existing protection |
| Safety features | Brake, anti-drop device, manual override wanted |
| Controls | Compatibility of the key switch, push-button control box and receiver |
The old motor’s rating plate is a starting point, never a sufficient reference.
A motor that is too weak will overheat and fail again; a motor that is too powerful costs more with no benefit. We aim for the right model, from a recognised brand, with parts available for the long term.
Can you switch from a tube motor to a central motor, or the other way round?
Yes, in some cases, but changing technology means modifying the axle and sometimes the brackets. The technician only suggests it if there is a real gain.
- From tube to central: useful when the curtain is too heavy for a tube motor, when you want a manual override or easier access to the motor for maintenance. The axle is adapted to take the motor in its centre.
- From central to tube: rarer, possible on a light shutter when there is not enough room in the shutter box. It then needs an axle compatible with the motor housed inside it.
The two technologies are compared in detail on our roller shutter motors page.
How does motor replacement work?
Replacement is done in one visit, once the motor has been chosen and is available.
- 1Diagnosis and quoteThe technician confirms that the motor is at fault, takes measurements and gives you a firm price.
- 2Making the curtain safeBefore anything is removed, the curtain is wedged so it can neither drop nor rise.
- 3Removing the old motorThe motor is taken off, along with the axle if it is a tube motor.
- 4Fitting the new motorMounting, wiring, reconnecting the controls, setting the limit switches.
- 5Safety testsFull up and down runs, checks of the brake, the anti-drop device and the manual override.
- 6Back in serviceExplanations, maintenance logbook updated and itemised invoice.
The old motor: we take it away and have it recycled, so you have nothing to dispose of.
How long does a motor replacement take?
The time depends mainly on the type of motor and access to the shutter box. Approximate times: 2 to 3 hours for a tube motor, 2 to 3 hours for a central motor, and half a day to switch from a tube motor to a central motor. A tube motor also means taking down the axle, so access to the shutter box matters a great deal.
If the motor has to be ordered, allow 2 to 5 working days. We keep central motors in common power ratings in stock. In the meantime, your premises are not left open: the shutter is closed and secured, and we come back to fit the motor as soon as it arrives.
Can the existing controls be kept after the replacement?
Often yes: the key switch, the push-button control box and the radio receiver are reconnected to the new motor if they are compatible and in good condition. The remotes are reprogrammed if necessary.
If the receiver is too old or incompatible, we replace it with new remotes, and take the opportunity to delete those no longer in use. All the options are on our page on remotes and control boxes. If the whole shutter is reaching the end of its life, a full replacement may make more sense than a new motor.
How much does roller shutter motor replacement cost?
The price depends on the type of motor, the weight of the curtain and any adaptations needed.
The technician gives you the price on site, after diagnosing the motor in place and before any work starts; the motor, fitting and adjustments are all on the quote. On the phone, you describe the fault and we tell you how soon we can be there. How the price of a job is set.
What makes the price vary?
- The type of motor: a tube motor, housed inside the axle, needs more dismantling than a central motor.
- The torque required: the heavier the curtain and the more often it is used, the more powerful the motor must be.
- A change of technology: switching from a tube motor to a central motor means adapting the axle, and is priced on a quote.
- Controls to rework: an incompatible receiver or extra remotes are added to the motor.
- Safety options: a manual override or an anti-drop device to replace changes the quote.
The quote is in writing and the price does not change during the job without your agreement. Guarantee: 2 years on the motor (manufacturer's warranty) and 1 year on fitting.
Where do we replace shutter motors?
We replace roller shutter motors throughout Normandy, including in:
