What does a loading bay consist of?
A complete loading bay combines a door, a levelling device, protection and a seal around the lorry. Each component has its role; if one is missing or out of order, the whole loading point slows down or becomes dangerous.
Dock leveller
A hinged platform, usually hydraulic, that rests on the lorry’s bed. Hinged lip or telescopic lip, depending on the vehicles you receive.
Dock bumpers
Rubber blocks or moving bumpers fixed to the frontage. They absorb the impact of each docking and protect the building and the leveller.
Dock shelter
Curtains or compressible pads, or an inflatable shelter, that fit around the back of the lorry. They block wind and rain and limit heat or cold loss.
Lift table
A platform that goes up and down to load at varying heights, useful where there is no pit or for low vans.
Signals and wheel chocks
Inside and outside lights, wheel chocks, dock lighting: they stop the lorry pulling away while the forklift is on the leveller.
Loading bay door
Usually an industrial sectional door, sometimes backed by a high-speed door.
DEPANN'Rideaux handles all of this equipment, all makes: installation, hydraulic maintenance of dock levellers, lift tables, replacement of bumpers and shelter curtains, and repair of loading bay doors.
How do you choose the equipment for your loading bay?
The choice depends mainly on the vehicles you receive and what you load. A bay receiving semi-trailers does not have the same needs as a parcel bay seeing rigid lorries and vans.
| Situation | Equipment to favour |
|---|---|
| Lorries with very varied bed heights | Telescopic-lip leveller, which adjusts precisely |
| Rear loading, regular flows | Hinged-lip leveller |
| Goods sensitive to temperature or damp | Dock shelter, possibly inflatable |
| Building without a pit, or small vans | Lift table or edge-of-dock leveller |
| Frequent, heavy docking | Reinforced or moving bumpers |
Sizing is done during a site survey (free): dock height, pit depth, vehicle types, rolling loads.
Why does loading bay equipment need maintenance?
Because a leveller takes repeated passes from loaded forklifts and a failure can cause a forklift or its operator to fall. Points to watch are the cylinders and hydraulic unit (oil leaks, pressure), the lip hinges, the condition of the deck plate, bumpers worn down to the metal and torn shelter curtains. A powered loading bay door in a workplace is also subject to the compulsory six-monthly inspection of automatic doors.
On the Normandy coast, around the ports of Le Havre or Cherbourg, salt and sea spray attack the steel structure of levellers and the bumper fixings: regular cleaning and checks extend their life. See our industrial door maintenance offer.
What should you do if a leveller or loading bay door breaks down?
Close off the bay, warn the drivers and call a technician: never drive a forklift onto a leveller that no longer holds its position. Common faults are a leveller that no longer rises or sinks on its own, a lip that no longer extends, a torn shelter or a stuck loading bay door.
Our industrial door repair page explains what to do. We work on logistics hubs in Le Havre, Rouen and Caen, and throughout Normandy. For an overview of doors and closures for industrial sites, see our industrial doors page; for a warehouse closed by a metal shutter, see the warehouse roller shutter.
