Why does a warehouse roller shutter break down more often?
Because it opens far more often than a shop shutter, it is operated by several teams and it works alongside forklifts and pallet trucks. Each of these leaves a specific mark on the installation.
| Constraint | Effect on the shutter | What we do |
|---|---|---|
| Frequent opening cycles | Brake wear, limit switches out of adjustment, thermal cut-out tripping | Inspection and adjustment on every visit |
| Knocks from forklifts | Bent bottom slat, warped guide rails, curtain coming out of its guides | Slat replacement, curtain put back in its guide rails |
| Several users a day | Lost remotes, key switches roughly handled | Controls replaced and reprogrammed |
| Loading bays exposed to wind | Curtain straining in its guide rails | Guide rails and fixings checked |
What does the French Labour Code say about warehouse shutter maintenance?
It requires automatic and semi-automatic doors and gates in workplaces to be maintained and inspected at least every six months, with an up-to-date maintenance log. These obligations are set out in articles R4224-12 and R4224-13 of the Code du travail, as detailed by the arrêté du 21 décembre 1993. The NF EN 13241 standard, for its part, covers industrial and commercial doors and closures.
In a warehouse, staff safety is at stake every time someone passes under the curtain. A shutter that comes down unexpectedly or a worn brake can cause injury. The obligations are set out in full in our guide to mandatory roller shutter maintenance.
What does a maintenance contract for a warehouse include?
Scheduled visits, a full inspection of each closure and an updated maintenance log. Our maintenance contract works like this:
- 1Inventory of closuresLoading bays, service doors, plant rooms: each shutter is identified and described.
- 2Scheduled visitsPlanned outside your peak periods: 2 visits a year for a motorised shutter, 1 visit a year for a manual one. The annual charge depends on the number of closures and whether they are motorised, with each additional shutter on the same site charged at a lower rate; it is given to you in writing after the inventory. Details of our maintenance plans.
- 3Full inspectionMotor, brake, limit switches, safety devices, axle, guide rails, slats and controls.
- 4Report and logWork carried out, parts replaced and faults found are recorded in the maintenance log.
Under contract, your call-outs are handled as a priority, with no guaranteed response time: it depends on where the technician is and is given to you when you call. Repairs benefit from preferential terms, set out in the contract. Commitment: one year, renewed automatically and cancellable up to one month before the renewal date.
How can you keep a loading bay out of action for as little time as possible?
By calling out a technician who carries common parts in his vehicle and makes the bay secure if a part has to be ordered. On central motors fitted with a manual override, the shutter can often be raised to finish a load. While you wait for the technician, cordon off the area and stop anyone passing under a curtain left halfway. All our emergency services are described on our emergency roller shutter repair page.
Which shutter should be fitted on a loading bay or business premises?
An electric roller shutter with solid slats is the most common choice for a loading bay or the door of business premises: it closes wide openings, keeps stock out of sight and copes with frequent cycles. When the old shutter is no longer worth repairing, we carry out a full replacement. All our models are on our metal roller shutters and grilles page.
Where do we work for warehouses?
In Normandy’s logistics, industrial and port areas, particularly along the Seine corridor, where ports and storage hubs are concentrated:



