Technicians available now Call-outs across Normandy 24 hours a day, 7 days a week Price given on site, before any work
5.0 on Google
Technicians available now · 24/7

Roller shutter repair in Normandy: we fix the part, not the whole shutter.

Repairing a metal roller shutter means replacing or restoring only the worn part: slat, spring, axle, guide rail, lock or motor. DEPANN'Rideaux repairs all makes of shutters and grilles in Seine-Maritime, Calvados, Eure, Manche and Orne. The technician arrives with the common parts, makes the diagnosis on site and gives you the price before any work starts.

  • 24/7nights and bank holidays
  • Price given on sitebefore any work
  • All brandsparts in stock

Request a call-out

Quick reply, 7 days a week
What do you need?
Add a photo (optional)

Your details stay confidential.

Your shutter is showing signs of weakness: what should you note before calling us?

A tired shutter almost always gives warning before it fails. These observations, made without taking anything apart, help us pin down the part and bring the right one.

  1. The noise. A regular squeak, a sharp clunk, metal rubbing on one side only: each sound points to a different part.
  2. The weight or the speed. A manual shutter that has become heavy and a motorised shutter that is slower or stops partway do not have the same cause.
  3. What the curtain looks like. Slats that are dented, bulging, rusty or out of line with their neighbours: note where they are (bottom, middle, top).
  4. The locking. Does the key turn easily? Do the bolts go properly into the guide rails?
  5. One or two photos. The whole shutter, then a close-up of the damaged area. Send them with the form or when you call +33 7 68 20 39 55.
Never take apart the shutter box, the axle or a spring box “to see what’s going on”. The springs stay under tension even with the shutter down: one wrong move can cause serious injury.

Why repair your roller shutter rather than replace it?

Because a metal roller shutter is an assembly of separate parts: when one breaks, the others are usually still in good condition. The curtain, the axle, the guide rails and the shutter box are designed to last much longer than a spring, a lock or a motor capacitor. Replacing only the faulty part therefore almost always costs less than a new shutter, and the work is done without any building work or keeping the shop closed for long.

Roller shutter repair is not a patch-up job, though. A replacement part must have the same specifications as the original: an identical slat profile, a spring sized for the real weight of the curtain, a lock compatible with the bottom slat. That standard is what makes the difference between a shutter that keeps going for years and one that breaks down again a few weeks later.

At DEPANN'Rideaux, the person who answers the phone is a technician. He asks the right questions, brings the right parts and, on site, tells you honestly whether the repair is worth it: you get the price after the diagnosis, before any work starts. A single contact, from diagnosis to invoice.

Which parts of a roller shutter can be repaired?

Practically all of them: each component of a metal shutter can be replaced separately. Here are the eight parts we work on most often, with the sign that should alert you.

Curtain and slats

The curtain is the set of interlocking slats. A knock from a vehicle, a crowbar or corrosion damages a few slats, rarely all of them.

Sign: a dented, bulging or holed slat, a curtain that rubs. See slat replacement.

Bottom slat

This is the reinforced slat at the bottom. It hits the ground every time the shutter closes and often carries the lock and bolts: it is the most exposed.

Sign: the shutter no longer closes flat, light shows under the slat, the bolts no longer engage.

Axle (barrel)

The tube the curtain rolls around. It can buckle after a knock or forced operation, or wear at the bearings.

Sign: uneven rolling, a shutter that “bangs” in the box, jerky movement. See axle, springs and guide rails.

Springs and spring boxes

On a manual shutter, the spring boxes counterbalance the weight of the curtain. A tired or broken spring makes the shutter hard, or even impossible, to operate.

Sign: a heavy shutter, one that comes down on its own or that gave a sudden sharp snap.

Guide rails

The side rails guide the curtain. A knock bends them, rust or debris clogs them, a fixing works loose.

Sign: rubbing on one side only, a shutter that always catches at the same height.

End plates and brackets

The supports that carry the axle on each side. A loose or cracked bracket throws the whole mechanism out and speeds up wear.

Sign: a vibrating shutter box, an axle that is no longer level, a knocking noise at the top.

Lock and bolts

Central lock or side bolts: they get dirty, seize, break or are forced during an attempted break-in.

Sign: a stiff key, one that spins without catching or no longer goes in. See shutter locks.

Motor and controls

Central or tube motor, capacitor, brake, limit switches, key switch or remote control: the electrical side has its own section.

Sign: a motor that hums without lifting, stops partway or no longer responds. See motors.

Repair or new shutter: how do you know which makes more sense?

In most cases a repair is enough: it remains the right option as long as the structure (axle, guide rails, shutter box, brackets) is sound and the parts are still available. Full replacement becomes worthwhile when several components fail at the same time or when the shutter no longer meets your needs. We give you a reasoned opinion, without pushing you to buy a new shutter.

What we findOur recommendation
A few damaged slats, the rest of the curtain in good conditionRepair: replace the slats concerned
Broken or tired spring, straight axleRepair: replace the spring box
Lock forced or key lostRepair: change the lock or cylinder
Guide rail bent over part of its heightRepair: straighten or replace the guide rail
Advanced corrosion on most of the slats and guide railsFull replacement worth considering
Slat profile no longer available and curtain badly damagedReplace the curtain or the shutter
Manual shutter too heavy for daily useRepair the springs, or motorise the existing shutter

If replacement is the answer, see our full shutter replacement page and the guide what determines the price of a new roller shutter.

Another option that is often forgotten: a manual shutter in good condition but hard work to operate can be motorised without changing the curtain. It is a good alternative when the springs are reaching the end of their life and the shutter is used every day.

How does a roller shutter repair work?

A repair is prepared before we set off: the more accurate the description of the fault on the phone, the better the chance that everything is sorted in a single visit.

  1. 1Description and photosYou explain what the shutter is doing and send one or two photos. The technician identifies the likely part and the type of shutter.
  2. 2Arrival time and safety adviceThe technician tells you when he can come, gives you safety advice in the meantime and loads the right parts.
  3. 3Diagnosis and price on siteThe technician checks the whole shutter, not just the part you reported: a bent guide rail can explain a broken slat. He then gives you the price before any work starts; nothing is done without your agreement.
  4. 4Replacing the partIf it is in the van, the repair is done there and then. If not, the shutter is made safe and fitting is scheduled as soon as the part arrives.
  5. 5Testing and detailed invoiceSeveral opening and closing cycles, adjustments, advice on use, then an invoice that itemises parts and labour.

Lead time for a part that has to be ordered: 3 to 5 working days for a standard slat, 2 to 3 weeks for a lacquered or special slat; 2 to 5 working days for a motor. The van carries the most common parts: capacitors, limit switches, universal remotes and receivers, cylinders, galvanised slats and common spring boxes.

How much does a roller shutter repair cost?

The price of a roller shutter repair depends on the part to replace, the size of the shutter, the time of day and the distance: the technician gives it to you on site, once the diagnosis is done and before any work starts. There is no single price, because two repairs with the same name do not always involve the same work.

  • The part involved and whether it is available: a galvanised slat, a cylinder or a standard spring box often travel in the van; a lacquered slat, a specific end plate or a non-standard axle have to be ordered, which means a second visit.
  • The number of parts: one slat or several, one spring box or both, a guide rail straightened or replaced over its full height.
  • The size and weight of the shutter: a wide, heavy curtain needs a stronger spring, a longer axle and more handling time.
  • The time of day: a surcharge applies at night (8 pm to 8 am), on Sundays and on bank holidays; it is included in the price the technician gives you on site, before any work starts. When the shutter still works, a repair booked on a weekday, during the day, is not affected.
  • The distance: the call-out charge depends on the distance from our base in Gruchet-le-Valasse and is given to you together with the price of the job.

On site, the technician checks the whole shutter. If he finds another worn part, he shows it to you and gives you a price before going any further: nothing is added without your agreement, and if you decline the work after the diagnosis, only the call-out is charged. Motor repairs are covered on the motor repair page.

Price given on site, before any work. Describe the symptom and send a photo: the technician arrives with the right parts, gives you the price after the diagnosis, then hands you a detailed invoice, part by part, useful for your insurer. To understand what makes an invoice vary: how the price of a repair is set.

Do you repair all makes and types of shutters?

Yes: we repair metal roller shutters and grilles of all makes, new or old, manual or motorised. What matters is not the manufacturer but the part: we identify the slat profile, the axle diameter, the type of spring or lock, then find the compatible equivalent.

  • Solid slat shutters: the most common on shops, they shield the window from prying eyes and the weather.
  • Micro-perforated shutters: the window stays visible with the shutter closed; a replacement slat must have exactly the same perforation so it doesn’t show.
  • Tube and link grilles: bent tubes or broken links can be replaced one by one.
  • Collapsible gates: concertina opening to the side, with their own rails, rollers and locks.
  • Electric roller shutters: the mechanical side is repaired as on a manual shutter, the electrical side comes under motors.

Town-centre shops, restaurants, pharmacies, garages, warehouses: the way the shutter is used changes, the method does not. A restaurant shutter operated late at night and a warehouse shutter that opens several times a day don’t wear in the same place, and we take that into account when choosing parts.

What is the difference between a repair and an emergency call-out?

An emergency call-out gets the shutter working again or makes it safe immediately; a repair deals with the cause for good. The two often follow each other: a shutter stuck open on a Saturday evening is first closed and secured, then the faulty part is replaced in the best conditions.

If your shutter is stuck right now, go straight to our 24/7 emergency roller shutter repair page, or the pages on a shutter stuck closed and bent or broken slats. If the shutter still works but shows signs of wear, a scheduled repair is exactly what avoids a breakdown at the wrong moment.

How can you avoid further repairs on your shutter?

With regular maintenance, which spots wear before something breaks. During a visit, the technician checks the spring tension, the condition of the axle and bearings, the alignment of the guide rails, the play in the slats, the lock and, on a motorised shutter, the limit switches and the brake. He cleans and lubricates the friction points with a suitable product.

For motorised closures installed in a workplace, the regulations require maintenance and an inspection at least every six months, recorded in a maintenance log (Code du travail, articles R4224-12 and R4224-13). We explain these rules in the guide mandatory roller shutter maintenance, and offer a maintenance contract suited to how often you use your shutter.

Day to day, a few simple habits extend the life of the shutter: don’t leave it halfway, don’t store goods in its path, guide a manual shutter down instead of letting it drop, and call us as soon as a new noise appears. Our guide looking after your roller shutter goes into detail.

Where do we repair roller shutters in Normandy?

We work across all five departments of Normandy, in town centres and on business parks alike. Each main town has its own page, with its neighbourhoods and its particular features: salt air on the coast, pedestrian streets, retail parks on the outskirts.

By the sea, in Le Havre, Dieppe, Fécamp or Cherbourg, salt-laden air attacks galvanised steel, guide rails and springs more quickly: more frequent checks are recommended there. The full list of towns we cover is on the areas we cover page.

Our call-outs

Which faults do we fix most often?

Four common situations in Normandy shops. For each one, the technician gives you the price on site, before any work starts.

Our work
Illustration of a repaired shop roller shutterRepair

Bent slats

Only the damaged slats are replaced, not the whole shutter.

DEPANN'Rideaux service van24/7

Night emergency

Shop made secure, price given on site, before any work starts.

Google reviews

What our customers say

Reviews are shown in their original language (French).

5.0
★★★★★
“Excellent” · 5 Google reviews
★★★★★
« Intervention rapide et très professionnelle. Dépanneur efficace, ponctuel et honnête sur les tarifs. Porte sectionnelle réparée rapidement et proprement. »
Khalid R.Google review
★★★★★
« Dépannage rapide ! Bon prix, très aimable et accessible. »
Emilie R.Google review
★★★★★
« Le monsieur est un professionnel, le travail est minutieux, je vous le recommande. »
Hassan I.Google review

All customer reviews See our Google profile

Frequently asked questions

Roller shutter repair: your questions

How much does a roller shutter repair cost?

The price depends on the part to replace (slat, spring, axle, guide rail, lock), the size of the shutter, the time of day and the distance. Describe the fault to the technician and send a photo if you can so he arrives with the right parts: he gives you the price on site, after the diagnosis and before any work starts, and the final invoice itemises every part fitted.

Can a single slat be replaced without changing the whole curtain?

Yes, as long as the same slat profile can be found. The technician replaces only the damaged slats and keeps the rest of the curtain. Everything is explained on the slat replacement page.

My manual shutter has become very heavy: is it serious?

It is the classic sign of a tired or broken spring. Stop forcing it and have the spring boxes checked: a spring that gives way completely can make the shutter drop suddenly.

Do I need a new shutter if mine is old?

Not necessarily: age matters less than the condition of the axle, the guide rails and the curtain. As long as these are sound and the parts exist, a repair is usually the more economical option.

Do you repair on the same day?

Yes, when the part is one of those the technician carries in his van. For a part that has to be ordered, the shutter is made safe the same day and the repair is scheduled as soon as the part arrives: 3 to 5 working days for a standard slat, 2 to 5 working days for a motor.

Is the repair guaranteed?

Yes: our repairs are guaranteed for 12 months on parts and labour. For a new motor, the guarantee is 2 years on the motor (manufacturer's warranty) and 1 year on fitting. The detailed invoice lists the parts fitted and serves as proof, including for your insurer.

Shutter squeaking, catching or not closing properly?

Have it repaired before it breaks down. A technician answers, brings the right part and gives you the price on site, before any work starts.