How does an industrial sectional door work?
It is made of horizontal panels joined by hinges. When it opens, rollers fixed at the sides run in two tracks: the door rises vertically, then turns under the ceiling or carries on up the wall, depending on the lift type. Its weight is balanced by torsion springs on a shaft above the opening, or by extension springs on some models. Cables link the bottom of the door to the drums on the shaft.
The panels are usually sandwich panels: two steel skins with an insulating foam core. The door stays within the building’s footprint, which keeps the area in front of the frontage free for lorries to manoeuvre.
Which lift type should you choose for a sectional door?
The lift type depends on the space available above the opening and on what occupies the ceiling (overhead cranes, lighting, ducts, heating).
| Lift | Principle | When to choose it |
|---|---|---|
| Standard | The door turns horizontal just above the lintel | Sufficient headroom, clear ceiling |
| Low headroom | Double track, the door turns very close to the lintel | Limited headroom |
| High lift | Longer vertical section before the curve | High ceiling, equipment to avoid above the opening |
| Vertical | The door rises entirely up the wall | Great height, overhead crane, cluttered ceiling |
| Roof pitch | The tracks follow the slope of the roof | Buildings with a pitched roof |
Measuring the headroom and side room during the site survey (free) determines which lift is possible.
Which buildings is an industrial sectional door suited to?
It suits buildings where insulation, security and space matter as much as the width of the opening.
- Warehouses and logistics hubs: often combined with an equipped loading bay.
- Workshops and factories: it keeps heat in the work areas in winter.
- HGV garages, dealerships, vehicle workshops: windows for light, an integrated wicket door so the large door need not open for every passage.
- Food industry: panels that are easy to clean, often paired with a high-speed door for traffic.
What options and safety devices are there for a sectional door?
Options cover light, pedestrian access and controls; safety devices, on the other hand, are not optional on a powered door.
We fit new industrial sectional doors, chosen from the major brands on the market and made to measure to the dimensions taken by the technician. The chosen options (glazing, colour, wicket door, motor) and the lead time are set out in the quote. We also maintain and repair existing doors of all makes.
Why is maintaining an industrial sectional door essential?
Because its springs, cables and rollers wear with every cycle and a break can be dangerous: a heavily used door wears out its torsion springs quickly. In a workplace, the compulsory six-monthly inspection of powered doors, with its maintenance log, comes on top of this.
In Normandy, the salt air of Le Havre, Dieppe or Cherbourg and the damp of the Seine valley speed up corrosion of tracks, hinges and cables. Regular industrial door maintenance should include checks on these points.
What should you do if your sectional door breaks down?
Stop operating it, clear the area and call a technician: on the phone, they give you safety advice and an arrival time. The technician gives you the price on site, after the diagnosis and before any work starts. The most common faults are a panel dented by a forklift, a roller out of its track, a slack cable, a broken spring or a motor that no longer responds. All are covered on the industrial door repair page. We work on the business parks of Le Havre, Rouen and Caen, and right across Normandy.
Weighing it up against another type of closure? Our industrial doors page compares all the options, including the warehouse roller shutter.
