How does a manual window roller shutter work?
A manual window roller shutter transfers your effort to the axle in the box above the window. The curtain of slats rolls onto this axle as it goes up and comes down under its own weight in the guide rails. There are two mechanisms, and the choice depends mainly on the size and weight of the shutter.
What are the pros and cons of a manual window roller shutter?
A manual shutter is the simplest and most reliable, but it needs a hand at every opening and becomes hard work on a large patio door.
| Strengths | Weaknesses |
|---|---|
| No cables, no power supply needed | You have to go to every window, morning and evening |
| Works during a power cut | Strap and winder wear over time |
| Few parts, simple repairs | Heavy going on a wide, heavy curtain |
| Can be motorised later without changing the curtain | No programming or central control |
For a living-room patio door used every day, compare with the electric window roller shutter or, without a power supply, the solar window roller shutter.
Strap or crank: which manual window roller shutter should you choose?
A strap suits light windows; a crank suits larger openings or anyone who wants to use less effort. A few pointers:
- Bedroom, bathroom, small window: a strap is quick and discreet.
- French window, wide window or aluminium slats: a crank greatly reduces the effort.
- Elderly person or awkward window: choose a crank, or go straight to window shutter motorisation.
- Second home on the coast, in Le Havre or near Fécamp: a manual shutter stays reliable between stays, provided you add locks and rinse rails exposed to salt.
It can be a retrofit installation (box in front of the window) or built-in (box in the wall): see retrofit window roller shutter.
What faults affect a manual window roller shutter?
The most common faults come from the part you handle: the strap, the winder or the gearbox. The good news is that they can be repaired without changing the shutter.
- Frayed or broken strap: it wears where it rubs on the strap guide. Have it replaced before it gives way.
- Strap no longer retracts: the winder spring is tired or broken.
- Crank turns freely: worn gearbox, rod or angled joint.
- Shutter runs crooked or jams: a slat out of a guide rail or a broken clip on the axle.
The whole process is on the window roller shutter repair page. We replace straps, winders and gearboxes on homeowners' window roller shutters, all makes. The technician gives you the price on site, after the diagnosis and before any work starts: nothing is done without your agreement.
Can an existing manual shutter be motorised?
Yes, in most cases: the strap or gearbox is replaced by a tubular motor fitted inside the axle, and the curtain is kept. The axle and box must be compatible and, for a wired motor, a power supply must be close by; otherwise a solar kit avoids running a cable. It is often the right answer when the winder needs replacing and the window is used every day. We supply, fit and motorise manual window roller shutters for homeowners, with a free site survey and a quote given after that visit. We work across Normandy, from Rouen to Caen. For an overview of all models, see our window roller shutters page.
