Why have your roller shutter installed by a professional?
Because a badly fitted shutter shows as soon as you use it: a curtain that rubs, guide rails out of plumb, a box that lets in draughts, a motor that strains. Fitting calls for exact measurements, fixings suited to the wall and fine adjustment.
A well-done roller shutter installation means a shutter that comes down straight, locks properly in the lowered position and stands up to the wind. In Normandy that last point matters: on the coasts of the Pays de Caux, the Côte de Nacre or the Cotentin, gusts put curtains to the test.
From the first call to the final adjustments, you deal with one person. DEPANN'Rideaux supplies and fits new window roller shutters, made to measure from the dimensions taken by the technician, with motors and components from leading brands on the market.
What types of fitting are there for a window roller shutter?
There are three main ways to fit a roller shutter: into the masonry, onto the existing window or onto the façade. The choice depends mainly on the space above the opening and the condition of the building.
Built-in fitting
The box is built into the masonry above the window and becomes invisible. It is mainly planned for new builds or major renovations.
More: our page on built-in roller shutters.Retrofit fitting
The shutter comes assembled with its box and rails and is fixed to the window frame or inside the reveal, with no masonry work.
More: our page on retrofit roller shutters.Face fitting
The box and rails are fixed to the outside wall, in front of the opening. Useful when the reveal is too narrow; it is one of the fitting options for a retrofit shutter.
Good to know: the box stays visible, so it is chosen in the colour of the façade.How does a roller shutter installation work?
Installation happens in two stages: a visit to measure and advise, then a fitting visit once the shutter has been made to size.
- 1Site surveyWidth and height measured at several points, squareness checked, along with the space for the box, the wall and the power supply.
- 2Choices and quoteType of fitting, operation, slat material and colour: the quote itemises every element.
- 3ManufactureThe shutter is made to the measurements taken. See our page on made-to-measure roller shutters.
- 4Removal and fittingThe old shutter is taken down if needed, the box and rails are fixed and the curtain is put in place.
- 5Adjustment and handoverLimit switches, tests, and an explanation of how to use and look after it.
Manual, electric or solar: which window shutter should you install?
The choice of operation depends on the size of the window, how often it is used and whether there is a power supply nearby.
| Operation | Who is it for? | Point to watch |
|---|---|---|
| Manual (strap or crank) | Small windows, rooms used less often, tight budgets | Straps wear; a crank suits larger curtains better |
| Electric (wired or radio) | Patio doors, daily use, central control of several shutters | A power supply must reach the box |
| Solar | Windows far from any power supply | The panel needs enough light, winter included |
The power connection for a wired electric shutter is assessed during the survey. If a new circuit has to be run to the box, it is included in the quote and carried out by us or coordinated with a partner tradesperson.
Which slats should you choose near the sea?
Near the sea, a lacquered aluminium curtain is the better choice: it is stiffer in the wind than PVC, with a finish suited to coastal conditions. PVC remains light and economical for sheltered windows.
- Aluminium: double-walled slats filled with insulating foam, rigid and suited to wide openings.
- PVC: light, for small and medium windows with little exposure.
- Anti-lift locks: locking straps that hold the curtain in the lowered position make it harder to lift from outside.
- Colour: box, rails and slats matched to the window frame or the façade.
From Le Havre to Cherbourg, salt air attacks fixings and clogs guide rails: regular rinsing extends the shutter’s life, as explained on our page on roller shutter servicing.
How much does a roller shutter installation cost?
The price depends on the size, the type of fitting, the operation and the finish: it is set out in a written quote after the site survey.
Site survey free, quote with no obligation. The quote itemises supply, fitting and options line by line. Nothing is ordered without your agreement.
- The size of the opening: a patio door needs a heavier curtain and often electric operation.
- The type of fitting: building a box into the masonry is a very different job from fitting onto an existing window.
- Operation and controls: switch, remote, timer, central control.
- The number of shutters: fitting a whole façade at once means fewer visits.
Where do we install window roller shutters?
We offer roller shutter fitting for homeowners, shops and offices in Normandy, for example:
Your existing shutter still works but you would like it electric? Motorising the roller shutter may be enough. The full range is on our window roller shutters page. For a shop front, see our shop roller shutter installation instead.





