Can any gate be motorised?
Almost any gate can be motorised, provided it is in good condition: a leaf that rubs, a worn hinge or a bent track must be put right before the motor is fitted. A motor does not correct a badly adjusted gate; it simply wears out faster.
During the visit, the technician checks that the gate opens and closes by hand without effort or tight spots, that the pillars are sound and that power can be brought to the motor. If repairs are needed, they are listed on the quote: see gate repair.
Which motor for a swing gate?
For a swing gate, there are three families of motors; the choice depends mainly on the width of the pillars and the position of the hinges.
Articulated arms
The motor is fixed to the inside face of the pillar and pushes the leaf through a folding arm. It suits wide pillars and hinges set back from the corner of the pillar.
Plan for: room for the unit on the pillar.Rams
An electric ram fixed between the pillar and the leaf pushes it in a straight line. Discreet and powerful, it needs enough fixing space behind the pillar.
Plan for: the measurements between hinge and pillar corner, taken during the visit.Underground motor
Housed in a box beneath the pivot of the leaf, it is invisible. It is the neatest solution, but it requires groundwork.
Plan for: a well-drained box, essential under Normandy rain.How do you motorise a sliding gate?
A sliding gate is motorised with a ground-mounted motor beside the opening: its pinion drives a rack fixed along the gate. The same principle applies to a cantilever gate, which runs on roller carriages rather than a track.
- 1Motor baseA plate set on a concrete footing, level and at the right distance from the gate.
- 2RackFixed to the gate, lined up with the pinion, with a little play so it does not bear down on the motor.
- 3Limit switchesStops or sensors set so the gate halts cleanly in the open and closed positions.
- 4Safety devices and testingPhotocells, flashing lamp, force and obstacle detection settings, then repeated tests.
The concrete footing, the box for an underground motor and the cable trench are included in the quote, carried out by our team or coordinated with a partner tradesperson.
How do you choose the power of a gate motor?
The motor is chosen according to the weight and width of the leaf, its wind load and the number of openings per day. A solid gate exposed to gusts on the coast or the Pays de Caux plateau needs more effort than an open-work (slatted) gate of the same size. A block of flats or business entrance used all day calls for a motor designed for intensive use. We fit motors from the major brands on the market and work on all makes; the warranty on the motor and the fitting is stated on the quote.
Which safety devices does an electric gate need?
An electric gate must stop or reverse as soon as it meets an obstacle: this is the purpose of standard NF EN 12453, which sets the safety-in-use requirements for powered doors and gates. Product standard NF EN 13241 covers the gate’s characteristics and its CE marking.
| Device | Role |
|---|---|
| Photocells | A beam between two cells: if it is broken, the gate will not close |
| Force limitation | The motor detects abnormal resistance and reverses |
| Safety edge | A rubber profile that stops the gate on contact |
| Flashing lamp | Warns pedestrians and drivers that the gate is moving |
| Manual release | Lets you open by hand during a power cut |
At a workplace, an automatic or semi-automatic gate must also be maintained and checked at least every six months, with a maintenance log (French Labour Code, articles R4224-12 and R4224-13, arrêté of 21 December 1993). See mandatory maintenance.
Which controls can you add to your gate motor?
- Remotes: one per driver, programmed on the motor’s receiver.
- Keypad or key switch: for delivery drivers, staff or regular visitors.
- Intercom or video entry: opening remotely from the house or reception.
- Backup battery: a few operations during a power cut, depending on the model.
- Pedestrian opening: a single leaf or partial opening, to walk through without opening the whole gate.
DEPANN'Rideaux fits and connects these accessories at the same time as the motor, or later on a gate that is already motorised.
The same control principles apply to our roller shutter remotes and control boxes.
How much does an electric gate motor cost?
The price depends on the type of motor, the accessories and the power supply work: it is set out in a written quote after a free site survey.
A quote that details everything. Motor, safety devices, controls, trench or conduit for the power cable: each item is priced before ordering. The electrical connection upstream of the motor is made in line with safety rules; never run a 230 V line to the gate yourself. The power supply to the gate is included in the quote, carried out by our team or coordinated with a partner electrician.
Where do we fit gate motors?
All over Normandy, from Rouen to Le Havre, by way of Lisieux and Caen. A new gate can be delivered ready for a motor: see made to measure metal gates. All our services are on the metal gates in Normandy page.
