Technicians available now Call-outs across Normandy 24 hours a day, 7 days a week Price given on site, before any work
5.0 on Google
Technicians available now · 24/7

Roller shutter stuck closed? We get you open again, 24/7.

A roller shutter stuck closed is most often caused by a motor that has cut out, a control fault, a broken spring, a slat out of its guide rail or a seized lock. DEPANN'Rideaux comes out 24/7 anywhere in Normandy to free it, then deal with the cause. The technician gives you the price on site, after the diagnosis and before any work starts.

  • 24/7nights and bank holidays
  • Price given on sitebefore any work
  • All brandsparts in stock

Request a call-out

Quick reply, 7 days a week
What do you need?
Add a photo (optional)

Your details stay confidential.

Your shutter will not open: what should you do while you wait for the technician?

These simple, safe checks sometimes solve the problem. They also help us bring the right part before we set off.

  1. Stop operating the shutter. Repeatedly pressing the switch or the remote can burn out the motor or knock the curtain out of line.
  2. Check the power supply. Is the circuit breaker for the shutter switched on? Is there a power cut in the street?
  3. Check the controls. Remote batteries, key switch, an emergency stop button left pressed in.
  4. Let the motor cool down. After several attempts, the thermal cut-out can switch the motor off. Wait before trying again.
  5. Take a photo and call +33 7 68 20 39 55. A photo of the shutter and the control box often tells us which part to bring.
Do not force the shutter by hand, take the shutter box apart or try to release a spring. Spring boxes are under high tension and can cause serious injury.

Why does a roller shutter stay stuck closed?

A roller shutter stuck in the closed position is almost never down to chance. In the vast majority of cases, the fault comes from one of these six causes. Spotting the right sign lets you describe the situation to us and saves time.

Motor failure or safety cut-out

Wear, overheating, a capacitor or a limit switch out of adjustment: the motor can no longer roll up the curtain.

Sign: the motor hums but the shutter does not move, or it makes no sound at all. See motor failure.

Electrical or control fault

A fuse, radio receiver, key switch or damaged wiring stops the opening command from reaching the motor.

Sign: no sound and no light, whichever control you use. See remote or control box not working.

Broken spring or axle

On manual shutters with counterbalance springs, a broken spring makes the curtain too heavy to lift.

Sign: a sharp crack when it breaks, then an unusually heavy shutter.

Slat out of its guide rail

After a knock, a gust of wind or through wear, a slat shifts and jams the curtain in the rails.

Sign: a crooked shutter, bent slats or slats sticking out of the guide rails. See broken slats.

Seized lock or bolt

On manual shutters, a dirty or broken lock keeps the side bolts in the locked position.

Sign: the key will not turn, or turns without catching. See shutter locks.

Attempted break-in

A forced lock, bent slats, distorted guide rails: the shutter has been damaged and no longer runs.

Sign: crowbar marks or signs of blows. See shutter forced after a break-in.

To find out more, read our guide why is my roller shutter stuck.

How do we free a shutter that is stuck closed?

Our priority: getting your business back up and running as quickly as possible, with a shutter that works and closes properly at night.

  1. 1Call and initial diagnosisYou describe the situation to the technician, with a photo if possible. He identifies the likely fault, gets the parts ready and tells you when he will arrive.
  2. 2Diagnosis and price on siteThe technician inspects the shutter, then gives you the price before any work starts: nothing is done without your agreement.
  3. 3Freeing the shutterManual override, putting the curtain back in its rails, or replacing the faulty part if it is in the van.
  4. 4Lasting repair or making safeIf a part has to be ordered, your premises are secured the same day and the permanent repair is scheduled.

What do we repair on site?

How much does it cost to free a roller shutter?

Every fault is different: the price is given on site, once the technician has inspected what is blocking your shutter, and always before he starts any work.

Price given on site, before any work. On the phone, describe the problem to the technician (a photo helps): he gets the right parts ready and tells you when he will arrive. On site, he makes his diagnosis and gives you the price; he only starts with your agreement and hands you a detailed invoice at the end. Note: if you decline the work after the diagnosis, only the call-out is charged. How the price of a repair is set.

What makes the price vary?

  • The cause of the problem: getting a motor going again or adjusting a control takes less time than putting a jammed curtain back in its rails.
  • The parts to replace: a spring box, a lock, a capacitor or a motor come on top of freeing the shutter itself.
  • The time of day: a call-out at night, on a Sunday or on a bank holiday carries a surcharge.
  • The distance: the call-out charge depends on the distance from our base in Gruchet-le-Valasse and is given to you together with the price of the job.
  • Access to the shutter: a shutter box mounted high up, a cluttered shop front or a large curtain make the job longer.

Where do we come out for a shutter stuck closed?

Our technicians travel across all five Normandy departments to free the roller shutters of shops, restaurants, pharmacies, garages and warehouses, by day and by night:

How can you stop it getting stuck again?

Most breakdowns give warning signs: a slower shutter, unusual noises, slats rubbing. Regular maintenance picks up these signs in time and extends the life of the installation. For motorised closures in a workplace, this maintenance is in fact a legal requirement.

We offer a maintenance contract suited to your business. You will find every emergency on our emergency roller shutter repair in Normandy page.

Google reviews

What our customers say

Reviews are shown in their original language (French).

5.0
★★★★★
“Excellent” · 5 Google reviews
★★★★★
« Intervention rapide et très professionnelle. Dépanneur efficace, ponctuel et honnête sur les tarifs. Porte sectionnelle réparée rapidement et proprement. »
Khalid R.Google review
★★★★★
« Dépannage rapide ! Bon prix, très aimable et accessible. »
Emilie R.Google review
★★★★★
« Le monsieur est un professionnel, le travail est minutieux, je vous le recommande. »
Hassan I.Google review

All customer reviews See our Google profile

Frequently asked questions

Shutter stuck closed: your questions

How quickly can you get to me?

Allow on average 45 min to 1 hour in Le Havre, 1 hour to 1 h 30 in Rouen and 1 h 30 to 2 hours in Caen, 24/7, from our base in Gruchet-le-Valasse. The exact time is confirmed when you call, depending on where the technician is.

Do you come out at night, on Sundays and on bank holidays?

Yes. We work 24 hours a day, 7 days a week, including nights, weekends and bank holidays. Any surcharge is included in the price the technician gives you on site, before he starts.

Can I free my roller shutter myself?

Only the risk-free checks: circuit breaker, remote batteries, emergency stop button, letting the motor cool down. Never force the shutter and never touch the springs or the axle, which are under tension. Our guide opening a shutter manually explains what you can safely do.

Do you repair all makes of roller shutter?

Yes. We work on all roller shutters and grilles, manual or motorised, whatever their make or age.

What happens if a part has to be ordered?

We free or secure your shutter the same day so that your premises are neither left open nor stuck shut. The permanent repair is scheduled as soon as the part arrives.

Is your shutter still stuck closed?

Do not lose a day’s takings. A technician answers straight away, tells you when he will arrive and gives you the price on site, before any work starts.