Why motorise a manual roller shutter?
To stop pulling on a strap that wears out, to operate a large patio door without effort and to control every shutter at once. A motorised shutter is also closed more regularly, which helps keep heat in during winter and the house cool in summer.
- Comfort: one press on the switch or remote, from your bed or sofa.
- Accessibility: no more strap to pull, which changes daily life for older people or anyone with reduced mobility.
- Security: shutters can close at a set time, even when you are away.
- Fewer operating faults: no more frayed straps or broken winders.
Can any roller shutter be motorised?
Most manual roller shutters can be motorised, provided the box is accessible and the curtain is in good condition. The technician checks this during the visit.
Access to the box
The box must open, from inside or outside, so the axle can be taken out and the motor slid in.
Check: a removable box, not a plastered-over casing with no hatch.Condition of the curtain
Cracked slats or a curtain that rubs must be repaired first: a motor does not make up for a shutter that drags.
Otherwise: see window roller shutter repair.Axle diameter
The tube motor must match the diameter of the roller axle; if not, the axle is replaced.
Good to know: the motor is chosen to suit the weight and size of the curtain.Power supply
A wired or radio motor needs a 230 V supply at the box. With no supply available, solar is the answer.
Plan for: the cable route.Which motor should you choose to motorise a roller shutter: wired, radio or solar?
A wired motor is the simplest, a radio motor the most flexible and a solar motor needs no power supply at all. The right choice depends mainly on how you want to control your shutters.
| Motor | Control | Who is it for? |
|---|---|---|
| Wired | Up/down wall switch connected to the motor by cable | A shutter controlled from the room, where cabling is easy to run |
| Radio | Remote or wireless control point, receiver built into the motor | Several shutters, central control, timers, home automation |
| Solar | Radio remote, panel and battery on the box | Windows with no power supply, fitting without chasing walls |
The solar motor is covered in detail on our page on the solar roller shutter.
Limit switches are set with adjusting screws on a mechanical motor, or stored in memory on an electronic one. Some electronic motors detect an obstacle or a curtain held by frost and stop by themselves: a useful option in Normandy, where frosty nights are not unusual inland.
How is a roller shutter motorised?
The technician replaces the manual operation with a motor, without touching the curtain or the guide rails if they are sound.
- 1Visit and choice of motorThe curtain is measured, the box and axle checked, and wired, radio or solar chosen along with the controls.
- 2Removal of manual operationThe strap and its winder, or the gear winder and crank rod, are removed and the opening filled.
- 3Fitting the motorThe tube motor is slid into the axle, fixed to the box bracket and connected.
- 4Controls and adjustmentThe switch is fitted or the remote paired, upper and lower limit switches are set and the shutter is tested.
We fit tube motors of all makes, chosen from the leading brands on the market to suit your shutter and your controls. The electrical connection of the motor is included in the quote, carried out by us or coordinated with a partner tradesman.
Which controls should you plan when motorising your shutters?
Each motorised shutter can have its own control (a switch by the window or a remote) and also be linked to a master control, a timer or a home automation hub. These options are compared on our electric window roller shutter page.
Think about central control from the start: radio motors using the same protocol group together easily, mixed motors much less so. If you would like to control your shutters from a smartphone, say so during the visit: the choice of motors depends on it.
How much does it cost to motorise a roller shutter?
The price depends on the type of motor, the size of the shutter, access to the box, the controls chosen and the power supply route: it is set out in a written quote after the visit.
The site survey is free, with an itemised quote and no obligation. The quote separates the motor, the controls and the fitting. Motorising several shutters at once means fewer visits.
DIY motorisation kits exist, but choosing the motor torque, adapting it to the axle and connecting it to 230 V take know-how: a mistake means a motor that strains or an unsafe electrical installation.
Where do we motorise window roller shutters?
For homeowners, offices and shops across the five Normandy départements:
Is your shutter too damaged to be motorised? A retrofit roller shutter fits onto the existing window, and roller shutter installation covers every type of fitting. The full range is on the window roller shutters page. For a shop shutter, see motorising a manual shop shutter.
