How does a collapsible gate work?
A collapsible gate is made of vertical bars joined by hinged cross-pieces that fold up like scissors. Open, it forms a compact bundle against the wall beside the opening; closed, it extends across the full width. It runs along a top track and, depending on the model, a floor track. A lock secures it to a post fixed to the wall.
Nothing rolls up: no axle, no spring, no shutter box. That is what sets it apart from every other option in our range.
When is a collapsible gate better than a roller shutter?
When it is impossible, or undesirable, to fit a shutter box above the opening. This is the case in particular with:
- too little headroom under the lintel, or a sign or false ceiling taking up the space;
- an old shopfront whose appearance you want to preserve (check local rules with the town hall);
- protection inside, fitted behind the window and invisible from the street during the day;
- a back door or stockroom window, a service hatch or a counter;
- a kiosk or a small neighbourhood shop that opens onto the street.
In historic town centres, where many shopfronts leave little height above the window, it is often the only simple solution. We fit and repair them all over Normandy, from Dieppe to Elbeuf.
What are the limits of a collapsible gate?
It needs space at the side and is operated by hand. Other points to be aware of:
- Space at the side: folded back, the gate takes up a strip of wall next to the opening.
- Floor track: it must be kept clean and can get in the way of a trolley. Gates without a floor track are available on request, depending on our suppliers’ models.
- No protection from the weather or from view: the window stays visible and exposed.
- Width: beyond a certain size, you need two leaves or a different closure. The limit depends on the model: we check it when we measure up.
For electric operation or a large opening, a tube and link grille offers similar visibility while rolling up, and an electric roller shutter does away with manual operation altogether.
Which shops is a collapsible gate suited to?
It suits small openings and secondary entrances rather than large shop windows. You will find it on neighbourhood shops, tobacconists and newsagents, kiosks and back rooms: see our advice on shop roller shutters. It also protects the windows and service doors of garages and workshops, alongside the main shutter.
Which options should you choose for your gate?
Three choices are enough to tailor the gate to your opening.
How is a collapsible gate fitted?
After surveying the opening and the space available at the side, the gate is made to measure, then fixed to the masonry with its tracks and locking post. We check that the folded bundle does not get in the way of the door or of customers coming in. See made-to-measure shutters and our roller shutter installation section.
How do you look after and repair a collapsible gate?
Most gates that catch simply have a dirty track. Regularly clear grit, leaves and dust from the bottom track, and lubricate the joints with a suitable product. If the gate still sticks, do not pull on it: a bent cross-piece or a broken roller soon gets worse. We replace rollers, cross-pieces, tracks and locks on all makes: see shutter locks and roller shutter repair.
To see the other solutions, take a look at our comparison of shop roller shutters and grilles.
