What is a pedestrian gate for?
It lets you come and go on foot without opening the main gate. It is quicker, puts less wear on the main gate’s motor and stops a dog or a child slipping out while the leaves open. The pedestrian gate is also where the letterbox, doorbell or intercom usually go.
A pedestrian gate is an outdoor access point in the boundary. For the front door of the house itself, see the steel door or the security door.
How do you match a metal pedestrian gate to your main gate?
For a consistent look, the metal pedestrian gate repeats the material, colour and infill design of the main gate: railings, solid boards, perforated sheet or half solid, half open. The two are usually chosen together.
If your gate is already in place, we note its model, RAL colour and rail heights to suggest a matching pedestrian gate. Our gate range is on the gates page, including swing gates and sliding gates. We also supply a pedestrian gate to match an existing gate, whatever the brand: it is made to measure from the dimensions taken by the technician.
Steel or aluminium: which material for a pedestrian gate?
Aluminium suits most pedestrian gates, especially near the sea; steel makes sense when you want a very rigid gate or a wrought-iron style.
| Material | Strengths | Watch out for |
|---|---|---|
| Coated aluminium | Light, does not rust, minimal upkeep | Less rigid on a wide gate |
| Galvanised, powder-coated steel | Rigid, impact-resistant, wrought-iron style possible | Rusts where paint chips: touch-ups needed |
On the coast, from Dieppe to Le Havre and on to Cherbourg, salt air and wind are hard on metal: choose careful protection and stainless fittings.
What fittings go on a metal pedestrian gate?
A practical pedestrian gate closes by itself, opens remotely for visitors and locks without you having to think about it.
Power for an electric strike or video entry is planned at fitting stage, with a buried duct to the pillar. We fit electric strikes and video entry systems; the duct and power supply are set out in the quote, carried out by us or coordinated with a partner tradesman.
How is a pedestrian gate fitted?
Fitting depends above all on the pillars: a gate only hangs true if its supports are solid and plumb.
- 1Site surveyWidth between pillars, condition of the masonry, slope of the path, opening direction, connections. The survey is free.
- 2QuoteMaterial, model, colour, lock and options set out in writing.
- 3FittingHinges and stop fixed, gate hung, clearance and latching adjusted.
As a rule, a pedestrian gate opens into the property so it does not encroach on the pavement. Before changing the look of your boundary, check with the town hall: the local planning rules (PLU) may control its height and appearance. For the main gate itself, see gate installation.
My pedestrian gate does not close properly: what can I do?
A gate that drags, no longer latches or whose lock catches almost always has a loose hinge, a pillar that has moved or a misaligned strike. An adjustment is often enough; if not, we replace the faulty part. See also gate repair. We work throughout Normandy, from Rouen to Caen: the technician gives you the price on site, after the diagnosis and before any work starts. All our doors are on the residential doors page.
