The shutter will not come down at closing time: what should you do first?
At closing time, the priority is to protect the premises and the people, not to repair. These steps apply whatever the cause of the fault.
- Stay on site or get someone to take over. A shop that is open and lit, with nobody inside, attracts attention.
- Put valuables away. Takings in the safe, expensive goods out of the window, terrace furniture and A-board brought in.
- Do the simple checks. Shutter circuit breaker, emergency stop button, remote batteries. Just one attempt after each check.
- Do not keep pushing the motor. If it has overheated, it cuts out on its own; restarting it again and again can burn it out.
- Call +33 7 68 20 39 55 with a photo. The technician tells you whether he is coming to close the shutter or to secure the premises for the night.
Why does a roller shutter break down in the evening?
A shutter does not necessarily break down more often in the evening, but it is the closing operation that reveals the fault. Left open all day, it is only put to work when it comes down, and that is when the fault shows.
- The motor’s thermal cut-out after several trips up and down during the evening (deliveries, putting the bins out, the terrace).
- A limit switch out of adjustment: the shutter stops too high or no longer stops at the bottom.
- An obstacle under the bottom slat: a chair, display stand or mat that has knocked the curtain off course.
- A slat out of its guide rail after a knock during the day: see bent or broken slats.
- Unresponsive controls: remote, receiver or key switch, see remote or control box not working.
Whatever the cause, the situation is the same: a shutter stuck open and premises you cannot leave. Our shutter stuck open page covers this in detail.
Which businesses need a night call-out?
Mainly businesses that close late or open very early, for whom a breakdown happens outside the hours of ordinary repairers.
Bakeries, which open before dawn, also call us when the shutter refuses to go up. For them, the night ends with the first batch of bread.
How do you secure the premises if the repair has to wait until the next day?
We close the shutter even when the faulty part cannot be changed during the night. Depending on the installation, the technician lowers the curtain using the manual override, immobilises it mechanically, cuts the power to a damaged motor or fits temporary locking.
You leave with your premises closed; the permanent repair is scheduled during the day, as soon as the part is available. The temporary solutions are described on our making your shop secure page.
How much does a night roller shutter call-out cost?
A night call-out costs the daytime price of the job plus a night surcharge. The technician gives you the amount on site, after the diagnosis and before starting, so you decide knowing what you will pay, and if you decline the work after the diagnosis, only the call-out is charged.
No surprises on the invoice. The principle is simple: a surcharge applies at night (8 pm to 8 am), on Sundays and on bank holidays; it is included in the price the technician gives you on site, before any work starts. On the other hand, there is no surcharge on Saturdays during the day. At the end, the technician hands you a detailed invoice. How the price of a repair is set.
What makes the price vary?
- The type of fault: adjusting limit switches, freeing the shutter or making the premises safe do not take the same time or the same work.
- What can be done that night: closing the shutter straight away, or securing it for the night and coming back during the day for the permanent repair, with the right part.
- The parts to replace: they come on top of the call-out, and parts cost the same by day and by night.
- The distance: by day or by night, the call-out charge depends on the distance from our base in Gruchet-le-Valasse and is given to you together with the price of the job.
- Access to the shutter: a locked stockroom, a circuit breaker nobody can find or a cluttered shop front make the job longer.
What should you get ready while the technician is on his way?
Get access to the shutter and its power supply ready: the technician saves time, and so do you. While you wait:
- The exact address and how to get in: pedestrian street, inner courtyard, service entrance, door code.
- A space for the van as close as possible to the shop front.
- Access to the circuit breaker and the control box, with the stockroom unlocked.
- The keys and remotes for the shutter, and the key to the lock if there is one.
- The front of the shutter cleared: tables, chairs, bikes, display stands.
- The installer’s name or the maintenance log if you have them: they tell us about the motor.
- Your phone charged, so that the technician can call you back on the way.
Do you come out at night across the whole of Normandy?
Yes, in all five departments, including Rouen, Caen, Le Havre and Cherbourg. At night, setting off from our base in Gruchet-le-Valasse, allow about 1 hour to reach Le Havre, about 1 h 15 for Rouen, about 1 h 45 for Caen and about 3 hours for Cherbourg; the exact time is confirmed when you call. Every emergency is on our 24/7 emergency roller shutter repair page.
