Your gate won’t open: what should you check before calling?
These checks are safe. They sometimes solve the problem and help us bring the right part.
- Look at the circuit breaker. Has the gate circuit tripped, after a storm for example?
- Try another control. Second remote, keypad, indoor button: if one of them works, the battery or the remote is at fault.
- Clean the photocells. A soft cloth on the two small lenses facing each other, and nothing between them (branch, wheelie bin, cobweb).
- Clear the track or the swing area. Gravel, leaves, a branch or snow often block a sliding gate.
- Note what the gate does and call +33 7 68 20 39 55. Motor noise, indicator light, flashing lamp: every detail helps the diagnosis.
Why won’t an electric gate open?
An electric gate that refuses to open usually has a control, safety or electronics problem, and less often a dead motor. Here are the causes we come across, with the sign that gives each one away.
Remote or receiver
Flat battery, remote no longer paired, faulty radio receiver or torn-off aerial.
Sign: the gate responds to the keypad or button, not to the remote.Photocells
Dirty cells, knocked out of line or damaged by damp: the system thinks something is in the way.
Sign: the gate opens but refuses to close, or reverses.Control board
Power surge after a storm, water or insects in the box, a worn component.
Sign: no indicator lights at all, or erratic behaviour.Motor, arm or ram
Capacitor, worn gearbox, limit switch out of adjustment, arm bent by an impact or seized ram.
Sign: the motor hums without moving, or strains and stops.Hinges, track and rollers
Rusty or torn-out hinges, bent ground track, worn rollers, broken guide wheels.
Sign: the gate rubs, squeaks or moves in jerks.Sagging gate
A leaf that has gained weight, a moving pillar, tired fixings: the gate drops and touches the ground.
Sign: the leaves no longer meet in the middle and the lock will not engage.How does a gate repair work?
Gate repair always follows the same logic: we start with the controls and work back to the mechanics, so that we never replace a part that works.
- 1Phone callYou describe the gate (swing or sliding, motor make if visible) and what it does. A photo helps a lot.
- 2Diagnosis on sitePower supply, controls, safety devices and motor, then hinges, track and rollers.
- 3Price given, then your go-aheadThe technician tells you the price on site, before starting; nothing is done without your agreement, and if you decline the work after the diagnosis, only the call-out is charged.
- 4Repair and testingPart replaced or adjusted, remotes reprogrammed, full opening and closing tests.
What do we repair on a metal gate?
- Motors: articulated arm, ram, underground or rack-driven motors, control board, capacitor, limit switches. If the motor needs replacing, see gate motors.
- Safety devices: photocells, flashing lamp, safety edge, obstacle detection settings.
- Controls: remotes, receiver, keypad, intercom linked to the gate.
- Mechanics of a swing gate: hinges, pivots, centre stop, leaf stops, lock and keeper.
- Mechanics of a sliding gate: ground track, rollers, top guide, rack; and on a cantilever gate, roller carriages and guide beam.
- Structure: sagging leaf, bar or frame weld to redo, local corrosion. We also work on the matching pedestrian gate.
We repair gates with any make of motor, including weld repairs on site.
Gate stuck open on a business site: what should you do?
A business gate stuck open leaves the site open to anyone: the priority is to close or secure it as quickly as possible, then deal with the cause. At a warehouse, on an industrial estate or in a shop car park, call as soon as you notice; the technician will tell you over the phone whether the gate can be closed by releasing the motor or needs a temporary solution. We attend business gates stuck open 24/7, nights and weekends included.
A fault like this is often a good moment to review the periodic inspections required for automatic gates at workplaces. Our guide to mandatory maintenance sets out these rules, which also apply to the shutters of your warehouses.
Why do gates suffer in Normandy?
Because damp, salt and wind attack both the mechanics and the electronics. On the coast, in Le Havre, Fécamp or Dieppe, salty air rusts hinges, rollers and screws. Inland, around Rouen or Caen, condensation gets into poorly sealed boxes. And the wind pushes on large solid leaves, which wears out swing gate motors. Regular greasing, clean photocells and a well-closed box prevent many breakdowns.
How much does gate repair cost?
The price depends on the fault and the parts: the technician gives it to you on site, once the diagnosis is done and before any work starts. On the phone we tell you when we are available and how soon we can arrive, not a price.
Price given on site before the work, itemised invoice at the end. Note that the call-out charge depends on the distance from our base in Gruchet-le-Valasse and is given to you together with the price of the job. A major repair (leaf to rebuild, gate to replace) gets a written quote. For a new gate, see gate installation.
All our gate services are on the metal gates in Normandy page. For a broken-down roller shutter, see emergency roller shutter repair.
