Technicians available now Call-outs across Normandy 24 hours a day, 7 days a week Price given on site, before any work
5.0 on Google
Technicians available now · 24/7

Solid slat roller shutter: your shop closed and out of sight.

A solid slat roller shutter closes off the whole shopfront: a continuous steel curtain with no openings that hides the interior and protects the glass from knocks and bad weather. DEPANN'Rideaux fits it to measure, motorises it and repairs it 24/7 across Normandy. The technician gives you the price on site, after the diagnosis and before any work starts.

  • 24/7nights and bank holidays
  • Price given on sitebefore any work
  • All brandsparts in stock

Request a call-out

Quick reply, 7 days a week
What do you need?
Add a photo (optional)

Your details stay confidential.

What is a solid slat roller shutter for?

It closes off a shopfront completely: with the shutter down, nothing inside can be seen and nothing gets through, whether prying eyes, rain or thrown objects. The curtain is made of galvanised steel slats (or aluminium, depending on the model) that interlock with one another. It rolls up onto an axle housed in a shutter box above the opening and runs down two side guide rails to the bottom slat, which rests on the ground.

It is the “classic” metal shutter of shopping streets. Its appeal comes down to one idea: what cannot be seen is less tempting.

What are the pros and cons of solid slats?

Its main strength is protection; its main drawback is that your window display disappears once the shop is closed. Here is an honest assessment before you choose.

StrengthsWeaknesses
Fully opaque: stock and till cannot be seen from the streetWindow display hidden in the evening, on Sundays and during holidays
Stands up well to impacts, blows and vandalismNo ventilation: the premises stay closed in with the shutter down
Glass protected from rain, wind and thrown objectsLarge smooth surface, often targeted by graffiti
Plain or powder-coated finish from the supplier’s RAL chartA dented slat shows and can hinder rolling up

If your window needs to stay visible at night, compare with the perforated roller shutter or the tube and link grille.

Which businesses should choose a solid slat shutter?

Solid slats suit businesses that keep valuable stock or have nothing to gain from being seen once closed.

  • Shops on busy streets: tobacconists and newsagents, mobile phone shops, electronics, jewellers. See our advice on shop roller shutters.
  • Garages and workshops: wide openings, tools and customers’ vehicles inside. See garage roller shutters.
  • Stockrooms, back rooms and delivery entrances, where visibility serves no purpose.
  • Frontages exposed to wind and driving rain, where the glass benefits from protection.

What options are there for your solid slat shutter?

Three choices shape everyday use: operation, finish and locking.

Manual or electricOn a manual model, spring boxes counterbalance the weight of the curtain. On an electric model, a central motor or tube motor does the work: see the electric roller shutter.
Slats and coloursPlain galvanised steel or powder-coated in a colour from our supplier’s RAL chart, on quotation. Double-walled slats on request, depending on our suppliers’ models.
LockingCentral lock on the bottom slat or side bolts in the guide rails, depending on width and use.

How is a solid slat shutter fitted?

Fitting follows four steps, from the survey to handover.

  1. 1Survey and measurementsWidth and height of the opening, space available for the shutter box, condition of the masonry that will take the guide rails.
  2. 2Detailed quoteType of slats, operation, locking and finish are set out in black and white.
  3. 3Made to measureThe shutter is made to the measurements taken: see made-to-measure shutters. Manufacturing time: 2 to 4 weeks, then fitting takes half a day to a full day.
  4. 4Fitting and adjustmentGuide rails and shutter box fixed, counterbalance or limit switches adjusted, then we show you how everything works.

For a replacement or a new shopfront, everything is explained on our roller shutter installation page.

What faults affect solid slat roller shutters?

The most common faults are a slat dented by an impact, a curtain coming out of its guide rails and a tired spring on manual models.

The good news: usually only the damaged slats are replaced, not the whole shutter. See slat replacement and, in an emergency, bent or broken slats. We work all over Normandy, from Rouen to Évreux, on all shutters of every make.

To last, a solid shutter needs little: clean guide rails, smooth operation and regular checks. Our guide to looking after your roller shutter sets out the safe things you can do.

Still undecided? Our page on shop roller shutters and grilles compares the five types.

Google reviews

What our customers say

Reviews are shown in their original language (French).

5.0
★★★★★
“Excellent” · 5 Google reviews
★★★★★
« Intervention rapide et très professionnelle. Dépanneur efficace, ponctuel et honnête sur les tarifs. Porte sectionnelle réparée rapidement et proprement. »
Khalid R.Google review
★★★★★
« Dépannage rapide ! Bon prix, très aimable et accessible. »
Emilie R.Google review
★★★★★
« Le monsieur est un professionnel, le travail est minutieux, je vous le recommande. »
Hassan I.Google review

All customer reviews See our Google profile

Frequently asked questions

Solid slat shutters: your questions

How much does a solid slat roller shutter cost?

It all depends on the size of the opening, manual or motorised operation, the locking and the finish. We measure up on site during a free site survey, then give you a detailed quote, fitting included, before anything is ordered. See how the price of a new shutter is worked out.

Can just a few dented slats be replaced?

Yes, in most cases. The new slats must match the profile of the curtain: we record it on site, then replace only the damaged slats.

Can my manual solid shutter be made electric?

Usually, yes, if the curtain, axle and shutter box are in good condition and leave room for the motor. See motorising a manual shutter.

Do solid slats make the shutter heavier to lift?

A well-balanced shutter lifts without excessive effort: the springs counterbalance the weight. If it becomes heavy, a spring is probably tired or broken. Do not try to adjust it yourself: it is under high tension. See axle, springs and guide rails.

Planning a solid slat shutter?

A technician answers you directly, advises you on operation and locking, then books a site survey, after which you receive a detailed quote.