When should a roller shutter be replaced rather than repaired?
A roller shutter should be replaced when the cost and frequency of repairs outweigh what a new shutter would give you, or when its structure can no longer guarantee the security of the premises. As long as the curtain, axle and guide rails are sound, a roller shutter repair remains the cheapest solution. We tell you straight after the diagnosis.
These are the situations in which we generally recommend a replacement:
Repeated faults
The shutter has been repaired several times in a short period, and each visit reveals a new problem. The whole thing is worn, not just one part.
Sign: repair invoices piling up for different causes.Advanced corrosion
The slats, guide rails or axle are eaten away by rust, which is common on shopfronts exposed to salty air or bad weather.
Sign: crumbling slats, holed guide rails, rust marks on the ground.Badly distorted curtain
After a vehicle impact or a break-in, too many slats are affected for a partial replacement to make sense.
Sign: curtain buckled over a large area, twisted guide rails.Parts no longer available
On some old shutters, the original slats, spring boxes or motor can no longer be found, or only through costly adaptation.
Sign: non-standard slat profile, antiquated mechanism.If only one part is at fault, consider targeted repairs first: slat replacement, axle, springs and guide rails or motor replacement.
How is the old shutter removed?
Removal means taking the old shutter apart in the reverse order of fitting, first neutralising anything under tension. It is the trickiest stage of the job, and must be left to a professional.
- 1Making safeThe motor’s power supply is cut, or the spring boxes on a manual shutter are released in a controlled way. The springs are under high tension: never try to take them apart yourself.
- 2Taking down the curtainThe curtain is unrolled, then removed slat by slat or in one piece depending on its size.
- 3Removing the axle, shutter box and guide railsUnless some parts are being kept, after checking.
- 4Preparing the supportsOld fixing holes filled, walls and lintel checked before the new shutter is fitted.
Can part of the old shutter be reused?
Sometimes, yes: a shutter box, guide rails or a recent motor in good condition can be kept, provided they are compatible with the new curtain. We check this case by case during the site survey.
- The shutter box can often be kept if it is sound and the new curtain fits inside it when rolled up.
- The guide rails can be reused if they are straight, free of corrosion and suited to the profile of the new slats.
- The motor can be kept if it is in good condition and powerful enough for the weight of the new curtain. A motor that is only just big enough would overheat and cut out.
Reusing what can be reused cuts the cost and duration of the job. But we never keep a doubtful part just to bring a quote down: a new shutter fitted to a worn guide rail will soon break down.
Is this the right time to switch to an electric shutter?
Yes, a full replacement is the easiest time to move from a manual shutter to an electric one: the motor is chosen for the new curtain and built in at the manufacturing stage, with no extra visit. You no longer have to lift the shutter by hand morning and evening, and you can operate it with a key switch or a remote.
You just need a power supply near the shutter. The differences between tube motors and central motors are explained on our page on electric roller shutters. If your current manual shutter is still in good condition, simply motorising it may be enough.
How do you keep your shop open as much as possible during the replacement?
By preparing the job in advance: the new shutter is made before the old one is removed, so your shopfront is only left unprotected for the time it takes to remove and fit. The old shutter keeps closing your premises throughout manufacturing.
What happens to the old roller shutter?
We take down, remove and recycle the old shutter: with a new shutter, disposal is included. You don’t have to deal with it or find a skip. Metals such as steel and aluminium are recyclable, so most of the removed shutter can be recovered.
How much does a full roller shutter replacement cost?
The price of a roller shutter replacement depends on the size of the opening, the type of curtain, the motor and any parts reused. It is always set out in a written quote, after a free site survey.
Written quote, with no obligation. Removal is shown on a separate line, disposal of the old shutter is included, and the price does not change without your agreement. What determines the price of a new shutter.
What makes the price vary?
- The size of the opening: the area of the curtain determines the quantity of slats, the axle section and the length of the guide rails.
- The type of curtain and the motor: solid or micro-perforated slats, manual or electric shutter.
- Removing the old shutter: this is added to the price of the new shutter and depends on its size and mechanism.
- Parts reused: a shutter box, guide rails or motor kept after checking lighten the quote.
- The condition of the supports: a damaged lintel or reveals needing repair make the job longer.
Deposit: 30% deposit when you order, the balance on installation; payment by bank card, bank transfer or cheque.
Where do we replace roller shutters?
We replace roller shutters throughout Normandy, including in Évreux, Dieppe, Lisieux and Elbeuf. The new shutter is built to your measurements, as explained on our made-to-measure shutters page, and can then be looked after under a maintenance contract. All our solutions are on the roller shutter installation page.
