Technicians available now Call-outs across Normandy 24 hours a day, 7 days a week Price given on site, before any work
5.0 on Google
Technicians available now · 24/7

Industrial door maintenance: safe doors and a logbook that is always up to date.

Maintenance of an automatic industrial door is compulsory in a workplace in France: it must be inspected at least every six months and each visit recorded in a maintenance logbook. DEPANN'Rideaux offers a maintenance contract for your sectional doors, high-speed doors, roller shutters and loading bays, with a single technician looking after all your doors in Normandy.

  • 24/7nights and bank holidays
  • Price given on sitebefore any work
  • All brandsparts in stock

Request a call-out

Quick reply, 7 days a week
What do you need?
Add a photo (optional)

Your details stay confidential.

Is industrial door maintenance compulsory?

Yes, for automatic and semi-automatic doors installed in a workplace. Articles R4224-12 and R4224-13 of the French Labour Code, detailed by the order of 21 December 1993, require the employer to have them maintained and inspected at least every six months, and to keep a maintenance logbook.

  • Who is responsible? The head of the establishment, whether owner or tenant of the building; the lease may set out who pays.
  • Which doors? All power-operated doors used by employees: sectional, high-speed, roller shutters, loading bay doors.
  • What proof? The maintenance logbook, which records inspections, repairs and parts replaced.
  • And fire doors? In buildings open to the public, they are also inspected under the fire safety regulations.

The regulatory framework is explained in our guide mandatory maintenance of closures: what the law says. A manual door is not subject to this six-monthly inspection, but regular maintenance often prevents a broken spring.

What does the technician check during industrial door maintenance?

The technician starts by testing every safety device on the door, then checks the mechanics and the operator, and ends with full cycles and an updated logbook.

Safety devices

Tests of photocells, safety edge, light curtain, traffic lights, emergency stop and reversing.

Aim: a door that truly protects your staff, with safety devices tested against the requirements of EN 12453.

Mechanics

Panels, hinges and rollers, tracks, springs, cables and drums, safety catches, fixings to the structure. On a high-speed door: curtain, guides, housing.

Aim: spot wear before it jams the door.

Greasing and adjustment

Lubrication of moving parts, balancing check, adjustment of limit switches and closing delay.

Aim: a door that puts less strain on its motor.

Operator

Motor, brake, control panel, controls, manual override, cycle counter where the panel has one.

Aim: anticipate electrical or electronic faults.

The checkpoints specific to levellers and shelters are on our loading bay equipment page. If a part needs changing, the technician gives you its price on site, before any work starts: nothing is replaced without your agreement.

What is the industrial door maintenance logbook for?

The logbook proves the door has been inspected on time and records its history: commissioning date, visits, faults, parts changed. The labour inspectorate, your insurer after an accident or claim, and the next occupant of the building may ask for it.

If a door has no logbook, we open one at the first visit, after a full condition survey. For several doors, each one has its own logbook, identified by its location.

Why sign an industrial door maintenance contract?

A contract ensures the compulsory inspections are done on time, without you having to think about it, by a technician who knows your doors.

Scheduled visitsDates are set with you, at quiet times on site, so loading bays are not held up.
Priority repairsUnder contract, you go to the front of the queue. The response time depends on where the technician is and is given when you call.
One contactThe same technician looks after all your doors: sectional, high-speed, roller shutters and loading bays.

The maintenance contract covers your industrial doors as well as your loading bay equipment, all makes. The number of visits per year and the priority repair terms are set out in the contract, according to your doors and your business.

Which signs should alert you between visits?

A door that changes behaviour often signals a fault: report it before it jams.

  • A new noise, a squeak or a bang when opening.
  • A slower door, one that leans or stops part-way.
  • A panel or curtain marked by a forklift impact.
  • A safety device that trips for no obvious reason.
  • Rust on the tracks or springs, common near the sea.

Watch without dismantling: do not touch the springs, cables or electrical panel. For a stuck door, call our industrial door repair service.

How much does industrial door maintenance cost?

The price of a contract depends on the number and type of doors: it is given in writing before signing.

An annual price written into the contract. It is set after a condition survey of your doors. Parts are invoiced separately: the technician gives you their price on site, after the diagnosis, and only changes them with your agreement.

  • The number of doors inspected during the same visit.
  • The type of doors: a high-speed door or loading bay needs more checks than a simple sectional door.
  • Usage: a heavily used door may justify more frequent visits than the regulatory minimum.
  • The number of sites to cover in Normandy.

Where do we maintain industrial doors?

Throughout Normandy, including Le Havre and Port-Jérôme, Rouen, Caen and Cherbourg. By the sea, salt air speeds up corrosion of springs and tracks: maintenance matters even more there. For the shutters of your shops or offices, see our roller shutter maintenance contract. A new door? Follow-up starts with the industrial door installation. The full range is on the industrial doors page.

Google reviews

What our customers say

Reviews are shown in their original language (French).

5.0
★★★★★
“Excellent” · 5 Google reviews
★★★★★
« Intervention rapide et très professionnelle. Dépanneur efficace, ponctuel et honnête sur les tarifs. Porte sectionnelle réparée rapidement et proprement. »
Khalid R.Google review
★★★★★
« Dépannage rapide ! Bon prix, très aimable et accessible. »
Emilie R.Google review
★★★★★
« Le monsieur est un professionnel, le travail est minutieux, je vous le recommande. »
Hassan I.Google review

All customer reviews See our Google profile

Frequently asked questions

Industrial door maintenance: your questions

How often should an automatic industrial door be inspected?

At least every six months in a workplace, under the order of 21 December 1993. A heavily used door or one exposed to salt air may need more frequent visits.

Can you take over the upkeep of a door previously maintained by another company?

Yes. The first visit is a condition survey: we check the door, its safety devices and its documents, then open or take over the maintenance logbook.

Should the tenant or the landlord pay for maintenance?

The duty to have the door inspected lies with the employer using it. How costs are shared between tenant and landlord depends on the lease: check your rental agreement.

Does a maintenance visit hold up the loading bay?

Only the door being checked, for the length of the visit. We move from one door to the next so the rest of the site keeps working.

Have your doors been inspected in the last six months?

A technician surveys your doors and suggests a follow-up suited to your business.