What is a built-in roller shutter?
It is the shutter whose mechanism disappears into the building: the roller tube and the rolled-up curtain sit in a masonry box, or in a prefabricated “tunnel” box placed on the window and built into the wall. The guide rails are fixed in the reveal. Nothing projects from the frontage, which makes it the most discreet window shutter.
In French it is called “traditional” because it is the historic way of fitting a roller shutter: it is planned at the structural stage, at the same time as the window.
When should you choose a built-in roller shutter?
When the wall is still to be built or rebuilt: new build, extension, extra storey, or major renovation with a new opening. The recess must be planned with the builder, above the window frame, with the right height and depth for the rolled-up curtain. We fit built-in roller shutters in new builds and extensions, working with your builder: the shutter is made to measure to the dimensions taken by the technician, and any masonry or electrical work is included in the quote, carried out by us or coordinated with a partner tradesman.
On an existing house whose lintel was not designed for a box, the retrofit roller shutter is almost always simpler: it avoids opening up the wall.
| Built-in shutter | Retrofit shutter |
|---|---|
| Invisible box, inside the wall | Visible box, on the wall or under the lintel |
| Planned during structural work | Fitted to an existing window |
| Mechanism usually reached through an inside access panel | Reached through the box cover |
| Clean frontage, nothing projecting | No masonry work |
How do you stop heat escaping through the box?
By choosing an insulated box and an airtight access panel: a poorly insulated built-in box is a weak point in the building envelope, letting cold air in. Today’s tunnel boxes are insulated and designed to limit these leaks. On an older shutter with a draughty box, the insulation can often be improved without replacing everything: we offer this insulation upgrade for existing boxes, after an on-site diagnosis.
In Normandy’s damp, windy climate, a well-sealed access panel also prevents condensation inside the box.
Manual or motorised: what options are there for a built-in shutter?
Every type of operation is possible. Straps and cranks are still common on older shutters: see manual window shutters. In new builds, a tube motor inside the roller tube is usually planned, with an electrical conduit laid before plastering: see electric window shutters. PVC or aluminium slats and colours are chosen as for any made to measure roller shutter.
What should you do when a built-in roller shutter breaks down?
Have it repaired through the inside access panel, without touching the frontage: that is the whole point of an accessible box. Typical faults are a broken strap, a slat out of its guide rail, a curtain coming down crooked or a silent motor. Do not force a jammed shutter and do not take the roller tube apart yourself.
Our work is described on the window shutter repair page. We travel all over Normandy, including around Caen, Évreux and Le Havre. To compare every model, see the window roller shutters page; and if you also run a shop, see our roller shutter maintenance contract.
