Why choose a made-to-measure garage door?
Because a made-to-measure garage door fits your opening instead of forcing you to alter it. In Normandy, many garages have been created in a longère, a flint barn or an old brick outbuilding: openings are rarely square, the lintel is sometimes low and ceiling space is tight.
A standard door fitted in such an opening leaves gaps at the sides, needs trims or masonry work, and closes badly. A door built to your dimensions fits without makeshift fixes: it keeps out wind and rain better, runs more quietly, and its springs and motor work in the right conditions. A well-fitted door also wears less quickly.
Which type of garage door should you have made?
The right type depends first on the space available on the ceiling, at the sides and in front of the garage. The technician advises you after seeing the site:
| Door type | How it opens | When to choose it |
|---|---|---|
| Sectional | Hinged panels that run up under the ceiling | Short driveway, insulation needed, ceiling space |
| Roller | Slats that roll into a box above the opening | Cluttered or very low ceiling |
| Up-and-over | One-piece panel that tilts up and stores under the ceiling | Like-for-like replacement, controlled budget |
| Side-sliding | Door that slides along an inside wall | Ceiling unusable, free side wall |
Each type has its own page: advantages, constraints and typical faults.
How is a made-to-measure garage door produced?
Everything starts with an accurate survey on site: we never place an order based on measurements taken over the phone.
- 1First conversationYou describe your garage and your project, with photos. The technician tells you which door types are possible.
- 2Site survey and measuringWidth at the top, middle and bottom; height on the left, centre and right; headroom above the opening, side room, garage depth, floor slope, power supply.
- 3Choices and quoteType, panels, insulation, colour, options and motor: the written quote itemises every component.
- 4ManufacturingThe door is made to measure to the dimensions taken by the technician, from models by leading brands on the market. Manufacturing time is stated on the quote.
- 5Fitting and adjustmentRemoval of the old door if needed, fitting, balancing, motor and safety adjustment, then a demonstration.
Fitting itself is covered on our garage door installation page.
Which materials and insulation should you choose?
For a made-to-measure garage door, the choice is mainly between steel and aluminium, with or without insulation:
Steel
Strong and common on sectional and up-and-over doors. Galvanised and coated, it is protected against rust.
Strength: impact resistance.Aluminium
Lighter and rust-proof, it is often used on roller doors.
Strength: holds up by the sea.Insulated panels
“Sandwich” panels filled with insulating foam, with seals all round.
Strength: useful if the garage is heated, connects to the house or is used as a workshop.Thicknesses and insulation performance depend on the manufacturer’s models: they are stated on the quote, not promised in advance.
What should your garage door look like?
A made-to-measure door is also chosen to suit the house: RAL colour, smooth, ribbed, panelled or wood-effect finish, windows to let light in. A colour matched to the windows or shutters gives a consistent frontage.
In old town centres and near listed buildings, of which Normandy has many, the look of doors may be regulated: check with your town hall’s planning department before confirming the colour. Replacing a door in a way that changes the outside appearance may require a prior declaration (déclaration préalable).
Which options can you add to a made-to-measure garage door?
- Pedestrian door: a wicket door in the door itself, to walk in without opening the whole door (depending on type and width).
- Motor: included from the order, it is chosen for the actual weight of the door. See garage door motors.
- Controls: remotes, wall button, key switch, keypad.
- Stronger locking: lock, bolts or anti-lift device depending on the model.
- External release: essential if the garage has no other way in, to open by hand during a power cut.
Will a made-to-measure door stand up to Normandy’s weather?
Yes, if it is chosen for its exposure. On the coast, from Le Havre to Cherbourg, salt air attacks poorly protected steel: aluminium or galvanised, coated steel is preferred, with suitable fixings. On a frontage exposed to westerly winds, the model’s wind resistance matters: it is shown in the manufacturer’s documentation. A garage door sold in Europe falls under standard EN 13241 and must carry the CE mark. The product documentation and its declaration of performance are handed to you at fitting.
How much does a made-to-measure garage door cost?
The price depends on the dimensions, type, panels and options: it is set in a written quote, after measuring.
Free site survey and quote, with no obligation. The survey is free; the quote itemises the door, motor, removal and fitting before anything is ordered.
- Dimensions: a double door is wider and heavier, so it needs longer panels and stronger springs and motor.
- Type and material: insulated sectional, aluminium roller, steel up-and-over…
- Finishes and options: colour, windows, pedestrian door, controls.
- The job: removing the old door, and any masonry work or new power supply needed, included in the quote and carried out by us or coordinated with a partner tradesperson.
Manufacturing time depends on the model and options: it is given to you during the site survey, then confirmed in writing on the quote.
Where do we fit made-to-measure garage doors?
All over Normandy, including Rouen, Caen, Le Havre and Lisieux. And if your current door breaks down while you wait for the new one, our garage door repair service can step in quickly. All our doors for the home are on the residential doors page; for a shop, see made to measure roller shutters.





