What do the regulations say about roller shutter maintenance?
In workplaces, the regulations require periodic servicing and inspection of automatic and semi-automatic doors and gates, a category that includes motorised roller shutters. Two articles of the French Labour Code, a ministerial order and a standard form the framework:
| Text | What it covers |
|---|---|
| Code du travail (Labour Code), art. R4224-12 and R4224-13 | Servicing and inspection of automatic and semi-automatic doors and gates in workplaces. |
| Arrêté du 21 décembre 1993 (ministerial order) | The detailed rules for these doors: inspection at least every six months, an up-to-date maintenance log. |
| Standard NF EN 13241 | The product standard for industrial and commercial doors and gates. |
This table summarises the general framework. For a particular situation, refer to the text in force on Légifrance (the official French legal database) or to your adviser.
The standard and the Labour Code do not play the same role: NF EN 13241 covers the design of the product, while the Labour Code governs its maintenance once installed. So a shutter that complied when it was fitted must still be inspected throughout its life.
Who does mandatory roller shutter maintenance apply to?
Mandatory maintenance applies to automatic or semi-automatic roller shutters installed in a workplace, meaning premises where employees work. In practice:
Motorised shutter, premises with employees
A shop, restaurant, pharmacy, garage or warehouse with staff: the obligation applies.
What to do: an inspection at least every six months and an up-to-date log.Manual shutter
The text covers automatic and semi-automatic doors. A manual shutter is still subject to wear: springs under tension, lock, guide rails.
What to do: maintenance is recommended; our contract provides 1 visit a year.A particular situation
A shop owner with no employees, shared premises, a shutter shared between several units: the answer depends on your case.
What to do: ask your insurer or your adviser.The types of shutter concerned are described on our page electric roller shutters.
How often should a roller shutter be serviced?
A motorised roller shutter in a workplace must be serviced and inspected at least every six months, which means a minimum of two visits a year. That is a floor, not a ceiling: a shutter that is operated very often, exposed to salty coastal air or already weakened may justify more frequent visits.
Between two visits, report any unusual sign straight away: a slower shutter, a new noise, a slat rubbing, a stop partway. Our guide to looking after your roller shutter lists the simple, risk-free tasks you can do yourself, and those to leave to the technician.
What should a roller shutter maintenance log contain?
The maintenance log is the document in which every operation carried out on the shutter is recorded: it proves that the maintenance has been done. The regulations require it to be kept up to date; in practice, a complete log includes:
- a description of the shutter: type of curtain, dimensions, type of motor, safety devices;
- the date of each visit, both periodic maintenance and repairs;
- the nature of the work: checks carried out, adjustments, lubrication, parts replaced;
- any faults found and the work recommended;
- the name of the company and the technician who did the work.
Keep it with the invoices and visit reports. After an accident, an insurance claim or a change of tenant, it is the first document you will be asked for.
Who can carry out roller shutter maintenance?
Roller shutter maintenance must be entrusted to a technician who is competent with doors and shutters, able to check the safety components and fill in the log. It is not restricted to the manufacturer or the original installer: an independent technician can work on all brands.
What you must not do yourself: touch the springs, the axle, the shutter box or the 230 V wiring. Spring boxes are under high tension and can cause serious injury. Your role is limited to watching and reporting.
Who is responsible for maintenance: the employer, the owner or the tenant?
Under the Labour Code, it is the employer who must make sure that the automatic doors and shutters in their workplace are serviced and inspected. The question of who pays, the owner of the building or the tenant, is a matter for the lease.
- The commercial lease divides up routine maintenance, repairs and the replacement of equipment: reread the clause that covers them.
- In a co-owned building (copropriété), a shared shutter may be the managing agent’s responsibility: check the co-ownership rules.
- Your insurer may, depending on your policy, ask for proof of maintenance after a claim: ask them.
If in doubt, the safest approach is to clarify the split in writing with your landlord, then have the log kept up to date whoever pays.
What rules apply in premises open to the public?
In premises open to the public (établissement recevant du public, ERP), installations are inspected under the fire safety regulations, in addition to the Labour Code rules if the premises employ staff. What these inspections cover and how often they take place can depend on the type and category of ERP, and on the role of the shutter (exit, escape route).
Shops, restaurants and pharmacies are often ERPs. To find out exactly what applies to your shutter, contact the body that carries out your periodic inspections or your insurer. See also our pages restaurant roller shutters and pharmacy roller shutters.
What does a roller shutter maintenance contract include?
A roller shutter maintenance contract organises the periodic visits, lists the points checked and provides for the log to be updated at each visit. During a visit, the technician checks in particular:
- 1The curtain and guide railsSlats, bottom slat, alignment, wear and fixing of the guide rails.
- 2The axle and counterbalanceBarrel, spring boxes, brackets and end plates.
- 3The motorMotor, brake, limit switches, manual override if the shutter has one.
- 4Controls and safety devicesKey switch, remote control, emergency stop, safety devices.
- 5Lubrication and reportLubrication of moving parts, log updated, work recommended.
Our roller shutter maintenance contract provides 2 visits a year for a motorised shutter, the required frequency for an automatic shutter in a workplace, and 1 visit a year for a manual shutter. The maintenance log is supplied and updated at every visit.
What each option covers:
- Motorised shutter: visits, adjustments, lubrication, safety checks and an up-to-date log; parts extra.
- Manual shutter: visit, adjustments, lubrication and an up-to-date log; parts extra.
- Additional shutter on the same site: checked during the same visit, which lowers the cost per shutter.
The annual price depends on the number of shutters to be looked after and whether they are motorised: it is given to you in writing before you sign anything. Commitment: one year, renewed automatically and cancellable up to one month before the renewal date. Benefits included: priority call-out in the event of a breakdown, with no guaranteed response time, and preferential terms on repairs, set out in the contract. For a job outside the contract, the guide to the cost of a roller shutter repair explains how the price is set.
Regular maintenance also reduces the risk of a breakdown at the worst moment. If your shutter is already stuck, see our 24/7 emergency roller shutter repair. We provide maintenance in Rouen, Caen, Le Havre and Cherbourg.
