How does a swing gate work?
Each leaf hangs on hinges set into a masonry pillar or welded to a metal post. When closed, the leaves rest against a central ground stop or against each other, and a lock or bolt holds them. When open, leaf stops keep them from banging in the wind.
There are double-leaf swing gates, by far the most common, and single-leaf gates, kept for narrower openings. Two leaves halve the swing and spread the weight over two pairs of hinges.
What are the pros and cons of a swing gate?
A swing gate is simple, with no track or special base, but it needs space behind it and fairly level ground.
| Strengths | Weaknesses |
|---|---|
| No track across the entrance, quick to fit on existing pillars | Needs a clear area the width of one leaf behind the entrance |
| Simple mechanism: hinges, stop, lock | A drive rising on the inside limits opening |
| Wide choice of styles: bars, solid, semi-open | Open leaves exposed to gusts; stops are essential |
| Easy to motorise, with several types of motor | Weak pillars or worn hinges make the leaves sag |
No space behind the entrance? Compare with the sliding gate or, on uneven ground, the cantilever gate.
Steel or aluminium for a swing gate?
Aluminium lightens the leaves and spares the hinges; steel brings rigidity and impact resistance. A heavy leaf pulls on its fixings every time it opens: with steel, solid pillars and properly sized hinges are essential. By the sea, in Le Havre or Cherbourg, powder-coated aluminium or galvanised then painted steel stand up better to salt air. On the windswept Pays de Caux plateau, open infill catches less wind than solid sheet. The full comparison is on our metal gates page.
Can your swing gate be motorised?
Yes, if it moves by hand without stiff spots and its hinges are sound. Three families of motor suit a swing gate: articulated arms, rams or underground motors, chosen according to pillar width, available space and the look you want. The weight of the leaves and the wind load of the infill also count. We fit all three types of motor, all brands, and the technician recommends the best suited one during the site survey. The detailed comparison of the three options and the safety devices to plan for are on our electric gate motors page.
How is a swing gate fitted?
- 1Site surveyWidth between pillars, condition and plumb of the pillars, slope of the drive, opening direction, cable duct. The survey is free.
- 2Detailed quoteMaterial, infill, colour, motor and accessories set out in writing.
- 3FittingHinges fixed to the pillars, leaves hung, central stop and leaf stops.
- 4AdjustmentLeaf alignment, ground clearance, lock; on a motorised gate, force and safety settings, then a handover with you.
Every step is detailed on the gate installation page.
What faults affect swing gates?
The most common fault is a leaf that sags and drags on the ground, because of worn hinges or a pillar that has moved. Next come a lock that no longer engages, a leaf that no longer closes flush and, on a motorised gate, an arm or ram that strains. Never force a leaf held by the motor: use the manual release only if the instructions allow it. For any work, see gate repair: we work from Rouen to Caen; the technician gives you the price on site, after the diagnosis and before any work starts. A matching pedestrian gate can be fitted alongside for people on foot.
