Technicians available now Call-outs across Normandy 24 hours a day, 7 days a week Price given on site, before any work
5.0 on Google
Technicians available now · 24/7

Roller shutter repair: your questions, our answers

This FAQ answers the roller shutter repair questions that shop owners ask us most often. Emergencies and response times, prices and quotes, faults, installation, motors, maintenance and regulations: each answer gives you the essentials in one sentence, then points you to the guide or service that covers the subject in detail.

  • 24/7nights and bank holidays
  • Price given on sitebefore any work
  • All brandsparts in stock

Shutter stuck right now? Don’t read any further: call +33 7 68 20 39 55. A technician answers 24/7, gives you safety advice and his arrival time; the price is given to you on site, after the diagnosis and before any work starts.

Emergencies and response times

Shutter broken down: what should you do and how quickly can we get there?

My shutter won’t close when I’m leaving in the evening: what should I do?

Stop operating the shutter and call us: we come out at night to close or secure the premises. If the motor is straining or overheating, switch off its power at the circuit breaker. See our page on a metal roller shutter stuck open.

How long does it take a technician to arrive?

It depends on the distance and on where the technician is when you call: the time is always confirmed over the phone. On average, from our base in Gruchet-le-Valasse, allow 45 min to 1 hour to Le Havre, 1 hour to 1 h 30 to Rouen and 1 h 30 to 2 hours to Caen. All our emergency services are on the emergency roller shutter repair page.

Does the service run during the holidays and on bank holidays?

Yes, all year round, 24/7, including over Christmas and New Year. As for the price, a surcharge applies at night (8 pm to 8 am), on Sundays and on bank holidays; it is included in the price the technician gives you on site, before any work starts. Details on our weekend and bank holiday call-outs.

My shutter was forced last night: where do I start?

Start by photographing the damage without touching anything, then call us to close up the premises. Your insurer will tell you whether you need to report it to the police and how long you have to make a claim. See shutter forced in a break-in.

Who answers when I call +33 7 68 20 39 55?

A technician, not a switchboard or a national platform. He identifies the fault with you, tells you when he can arrive, gives you the price on site before starting and remains your only contact until the job is finished. All our contact details are on the contact page.

Which towns in Normandy do you cover?

We cover Seine-Maritime, Calvados, Eure, Manche and Orne. Rouen, Le Havre, Caen, Évreux, Cherbourg, Dieppe, Lisieux, Fécamp, Elbeuf and Alençon each have their own page. The full list is on the areas we cover page.

Prices and quotes

How much does work on a metal roller shutter cost?

What budget should I allow to have a roller shutter freed?

The budget depends mainly on the cause of the problem: adjusting a limit switch, putting a slat back in its guide rail or replacing a motor do not cost the same. Any parts, the time of day and the distance also count. Describe the problem to the technician, with a photo if possible, so he arrives with the right parts: he gives you the price on site, after the diagnosis and before any work starts, and nothing is done without your agreement. See how the price of a repair is set.

Why does a night call-out cost more?

Because it means a technician working outside normal hours: a surcharge applies at night (8 pm to 8 am), on Sundays and on bank holidays; it is included in the price the technician gives you on site, before any work starts. The call-out charge is not increased and parts cost the same by day and by night. When you call, you can already choose between a call-out straight away and one the next morning. See our night call-outs.

Do I have to pay to get a quote?

For an emergency repair, the technician works out the price on site, after the diagnosis and before any work starts; if you decline the work after the diagnosis, only the call-out is charged. For a new shutter, the site survey is free, and the quote, handed over after that on-site visit, comes with no obligation. Details in the guide what determines the price of a new roller shutter.

What does a new metal roller shutter cost, including fitting?

The price of a new fitted shutter depends mainly on the dimensions of the opening, the type of curtain, the finish, the motor and the fitting conditions. As every shutter is made to measure, it is priced in a written quote after a free site survey; taking away the old shutter is included. See our roller shutter installation service.

How can you spot a cowboy repairer?

Be wary of anyone who starts work without giving you a price, demands immediate payment or doesn’t provide a detailed invoice. A call-out presented as free, with no price given for the work, should also set alarm bells ringing. Our guide to repair scams sets out the warning signs.

Is a deposit required for a shutter installation?

Yes: 30% deposit when you order, the balance on installation, by bank card, bank transfer or cheque. The payment terms are set out in the quote, which you sign before any equipment is ordered. For a shutter made to the exact measurements, see made-to-measure shutters.

Faults

Why has my metal roller shutter stopped working?

The motor hums but the shutter doesn’t move: where is the fault?

Most often the motor’s capacitor or electromagnetic brake is to blame, more rarely a mechanical jam in the curtain. Persisting risks making the damage worse: stop operating it and describe the noise to the technician. See roller shutter motor not working.

Why does my shutter stop halfway?

A misadjusted limit switch, the motor’s thermal cut-out or the curtain rubbing in the guide rails often cause this. After several attempts, let the motor cool down before trying again. Our guide why is my roller shutter stuck goes through all the causes.

The remote has stopped working: what should I check before calling?

First check the batteries, then try the key switch and the shutter’s circuit breaker. If nothing responds, the radio receiver or the control board may be at fault. See remote or control box not working.

A slat is sticking out of the guide rail: can I keep using the shutter?

No: every operation can bend other slats or distort the guide rail. Leave the shutter as it is and call out a technician, who will put the curtain back in place or change only the damaged slats. See bent or broken slats.

My manual shutter has become very heavy to lift: why?

A counterbalance spring has probably broken or gone slack. Don’t try to adjust it: spring boxes are under high tension and can cause serious injury. See our repairs to the axle, springs and guide rails.

The key spins without catching: does the lock need changing?

Not necessarily: a broken mechanism or a bolt rod that has come loose can cause the same symptom. The technician opens the shutter, then repairs or replaces the lock depending on its condition. See roller shutter locks.

Installation and motors

How do you choose and motorise a metal roller shutter?

Can a motor be added to a manual metal roller shutter?

Yes, if the curtain, the axle and the guide rails are in good condition. The technician checks compatibility, chooses a motor suited to the weight of the curtain and installs the control of your choice. See motorise a manual shutter.

What is the difference between a central motor and a tube motor?

A central motor is fixed in the middle of the axle, a tube motor sits inside the axle. Central motors are mainly fitted to wide shutters and may have a manual override. See motor replacement.

Which shutter lets the window be seen when it is down?

Micro-perforated shutters and tube and link grilles both let the window be seen. The first keeps the look of a solid shutter, the second gives maximum visibility. Compare the micro-perforated shutter and the tube and link grille.

My shop window is a non-standard size: is that a problem?

No, a metal roller shutter is made to the exact measurements of the opening. The site survey is there precisely to record these dimensions and the fitting constraints. See full shutter replacement.

How do you open a motorised shutter during a power cut?

Only with the manual override (winch or crank), if the motor has one and the manual says so. Without a manual override, wait for the power to come back or call a technician, and never force the curtain. See our electric roller shutter page.

Maintenance and regulations

What are the maintenance obligations for a metal roller shutter?

Does the law require a metal roller shutter to be maintained?

Yes for automatic and semi-automatic shutters in workplaces: maintenance and inspection at least every six months, with an up-to-date maintenance log. The framework comes from the French Labour Code (Code du travail, articles R4224-12 and R4224-13) and the arrêté du 21 décembre 1993. It is all explained in our article on mandatory roller shutter maintenance.

What does the technician check during a maintenance visit?

He checks the curtain, the guide rails, the axle, the counterbalance, the motor, the brake, the limit switches, the controls and the safety devices, then greases the moving parts. Each visit is recorded in the maintenance log. See our roller shutter maintenance contract.

What maintenance can I safely do myself?

Keep the threshold and the bottom of the guide rails clear, with the shutter stopped, and watch how it works so you can report anything unusual. Springs, axle, shutter box and electrical wiring are a job for a technician. Our guide looking after your roller shutter explains what you can do.

Which standard applies to metal roller shutters?

The NF EN 13241 standard covers industrial and commercial doors and closures, including metal roller shutters. It deals with the product, while the Code du travail governs its maintenance in workplaces. See our installation service.

Does a shop open to the public have extra inspections?

Yes, a building open to the public (ERP) is subject to the inspections set out in the fire safety regulations, which may cover some closures. What they include depends on the type and category of the establishment: check with your inspection body or your insurer. See our shop roller shutter page.

Your question isn’t on the list?

Ask a technician directly: he answers straight away, 24/7, anywhere in Normandy.