Technicians available now Call-outs across Normandy 24 hours a day, 7 days a week Price given on site, before any work
5.0 on Google
Technicians available now · 24/7

Made to measure metal gate: built to the exact size of your entrance.

A made to measure metal gate is built from the real measurements of your entrance: width between pillars, slope, threshold and space available for opening. DEPANN'Rideaux helps you choose the type of opening, material, infill and colour, plans for the motor and fits the gate across Normandy. The site survey and quote are free.

  • 24/7nights and bank holidays
  • Price given on sitebefore any work
  • All brandsparts in stock

Request a call-out

Quick reply, 7 days a week
What do you need?
Add a photo (optional)

Your details stay confidential.

Why have a metal gate made to measure?

Because an entrance is rarely the size of a catalogue gate: a made to measure gate fits the real width between pillars, the slope of the drive and the style of the house or building. In the longères of the Pays de Caux, village houses or farmyards, pillars are often old, uneven in width and sometimes out of plumb.

A standard gate means filling the gaps with packing or rebuilding the masonry. A gate made to your measurements closes with no gap, does not scrape on a sloping drive and leaves the widest possible clear opening for vehicles. It is also better balanced, so it is easier on its hinges and on its future motor.

Which type of gate should you have made?

The type of opening depends first on the space available behind the gate and to the side. Each type has its own detailed page; here are the essentials.

TypeYou need…Suits…
Swing gateRoom behind the gate for the leaves to swingFlat, clear drive, house entrance
Sliding gateA free length of wall or fence to the side, a ground trackDrive sloping upwards, narrow yard
Cantilever gateEven more side space, no ground trackUneven ground, gravel, business sites

A matching pedestrian gate can be made in the same design: see the metal pedestrian gate.

Which material for a made to measure gate?

Steel suits you if you want strength and weight, aluminium if you want a light gate that does not rust. The choice mostly depends on exposure.

  • Galvanised, then powder-coated steel: rigid and impact-resistant, suitable for wide openings and business sites. The galvanising under the coating protects against rust.
  • Powder-coated aluminium: light, it spares the hinges and motor and does not rust, a real advantage near the sea, in Le Havre, Fécamp or Dieppe, where salty air attacks poorly protected steel.
  • Wrought iron or ironwork: for character houses, with scrolls and decorative bars.

Materials, profile sections and finishes depend on the models: they are set out in black and white on the quote. Your gate is made to measure to the dimensions taken by the technician, in steel, aluminium or wrought iron depending on the model chosen.

Which infill and finish should you choose?

The infill decides what can be seen from the street and how much wind the gate catches. The more solid it is, the more privacy it gives, and the more it resists gusts.

SolidSheet or solid boards: total privacy. High wind load, to be taken into account for the hinges and motor.
Open or barredYou can see through and the wind passes. A classic for village houses and entrance railings.
Semi-openSolid lower part, open upper part: a compromise between privacy and lightness.

For colour, powder coating in a RAL chart shade gives an even, protective finish. Before choosing, check your commune’s planning rules (PLU): depending on the area, the town hall may control the height, appearance or colour of gates and fences (the formalities are explained on the gate installation page).

How is your gate made?

Everything starts with a site visit: manufacture is never launched on measurements taken over the phone.

  1. 1Site surveyWidth between pillars at top and bottom, pillar plumb, slope and surface of the drive, space for opening, power supply.
  2. 2Choices and quoteType of opening, material, infill, colour, lock, motor: every item is on the quote.
  3. 3ManufactureThe gate is made to the measurements taken, with the plates or brackets planned for the motor. The manufacturing lead time is stated on the quote.
  4. 4Fitting and adjustmentFixing, adjustment of the leaves or track, commissioning of the motor: see gate installation.

Should the motor be planned at the manufacturing stage?

Yes, even if you do not motorise straight away: a gate designed for a motor gets its reinforcements, plates and cable routes in the right place. The motor is then chosen according to the weight and width of the leaf and its wind load. Everything is explained on our electric gate motor page.

How much does a made to measure metal gate cost?

The price depends on its size, material, infill and options: it is set out in a written quote after the visit.

Site survey free, detailed quote with no obligation. The quote lists every component before anything is ordered.

  • Size: clear opening width, height, number of leaves.
  • Material and infill: aluminium, steel, ironwork; solid or open.
  • Finishes: RAL colour, patterns, lock, matching pedestrian gate.
  • Motor and fitting: type of motor, safety accessories, threshold or pillar work.

Where do we measure up and fit gates?

We measure up and fit gates in all five Normandy departments, notably around Rouen, Caen and Évreux. The same technician follows your project from survey to commissioning, then handles gate repair if needed. For business entrances, think about the building’s doors too, such as a warehouse roller shutter. See the full range on our metal gates page.

Google reviews

What our customers say

Reviews are shown in their original language (French).

5.0
★★★★★
“Excellent” · 5 Google reviews
★★★★★
« Intervention rapide et très professionnelle. Dépanneur efficace, ponctuel et honnête sur les tarifs. Porte sectionnelle réparée rapidement et proprement. »
Khalid R.Google review
★★★★★
« Dépannage rapide ! Bon prix, très aimable et accessible. »
Emilie R.Google review
★★★★★
« Le monsieur est un professionnel, le travail est minutieux, je vous le recommande. »
Hassan I.Google review

All customer reviews See our Google profile

Frequently asked questions

Made to measure gates: your questions

Can I measure my entrance myself to get a quote?

Your measurements and a few photos help us prepare the visit, but manufacture only starts on the measurements taken by the technician, who also checks pillar plumb and slope.

How do you protect a metal gate from salty air?

By choosing powder-coated aluminium, or galvanised then coated steel, at the manufacturing stage, with corrosion-resistant fixings. Rinsing with clean water now and then and touching up paint chips quickly do the rest.

Is a solid gate suitable for windy areas?

Yes, provided this is allowed for: strong hinges and pillars, effective stops and a motor sized for the wind load. On the coast, a semi-open infill eases the strain.

Can the gate match the pedestrian gate and fence?

Yes: the pedestrian gate and fence panels can use the same infill, profiles and RAL colour as the gate. Include them in the quote so they are made and coated identically.

A gate made for your entrance?

A technician comes to measure up, advises you on type and material, and gives you a detailed quote.