Technicians available now Call-outs across Normandy 24 hours a day, 7 days a week Price given on site, before any work
5.0 on Google
Technicians available now · 24/7

Industrial door automation: a safe operator, set up for your business.

Industrial door automation combines a motor, a control panel and safety devices (photocells, safety edge) that protect people and vehicles, in line with EN 12453. DEPANN'Rideaux motorises manual doors, replaces ageing operators and sets up the controls to suit your traffic, throughout Normandy.

  • 24/7nights and bank holidays
  • Price given on sitebefore any work
  • All brandsparts in stock

Request a call-out

Quick reply, 7 days a week
What do you need?
Add a photo (optional)

Your details stay confidential.

Why automate an industrial door?

To save time on every passage, reduce operator fatigue and keep the building closed as much as possible. A large sectional door worked by chain takes real effort and lost minutes, multiplied by the number of lorries in a day.

Automation also allows automatic closing after each passage: less heat lost in winter, less dust and humidity in the warehouse, and a site that is never left open by mistake at night. Finally, it ties into the site’s access control (badge, remote control, intercom).

What does industrial door automation consist of?

An industrial door operator has four parts: the motor, the control panel, the controls and the safety devices.

The motor

On a sectional door, the geared motor is usually mounted on the end of the shaft. On an industrial shutter, a central motor or an end-of-axle motor is used. Many have a manual override by chain or crank.

Choice: according to the door’s weight and cycles per day.

The control panel

The brain of the door: it receives commands, drives the motor, manages limit switches and timed automatic closing, and displays faults.

Plus: a cycle counter that helps plan maintenance.

The controls

Push-button box, hold-to-run control, radio remote, ceiling pull cord, detection radar, floor loop for vehicles, badge reader.

Choice: depending on who opens the door – pedestrians, forklift drivers or lorry drivers.

The safety devices

Photocells, a safety edge at the bottom of the door, a light curtain on very busy passages, traffic lights, a safety catch on the door.

Role: stop or reverse travel before any dangerous contact.

We install and repair operators and control panels of all makes, including those of the leading brands on the market.

What does EN 12453 say about industrial door automation?

EN 12453 sets the safety-in-use requirements for power-operated doors: the door must not crush, shear or draw in a person. The level of protection required depends on the control mode.

  • Hold-to-run control: the operator keeps the button pressed and watches the door throughout. The simplest configuration, reserved for trained users.
  • Impulse or automatic control: the door closes by itself, unsupervised. Detection and force-limiting devices become essential: safety edge, photocells, even a light curtain.

Motorising an existing manual door therefore also means checking it is compatible: correct balancing, safety catch present, structure in good condition. The power-operated door must meet the product standard EN 13241. If the door is too worn, consider a new made-to-measure industrial door supplied with its own operator.

How is an industrial door automated?

  1. 1Site surveyCheck of the door’s condition, its balancing, the power supply and the space for the control panel.
  2. 2Choice of operatorMotor sized for the door, controls suited to the users, safety devices according to the operating mode.
  3. 3Installation and wiringMotor and control panel fitted, controls and safety devices wired. Connection is made to a compliant power supply: if there is none or it needs bringing up to standard, this work is included in the quote, carried out by us or coordinated with a partner tradesman.
  4. 4Adjustment and testsLimit switches, speed, closing delay, test of every safety device and of the manual override.
  5. 5HandoverControls and emergency release explained to your staff, maintenance logbook updated.

Can just the motor or the control panel be replaced?

Yes, when the door is sound. A burnt-out motor, an unobtainable circuit board or an old panel without modern safety devices can be replaced without changing the door. It is often the moment to upgrade the safety devices: an old door with no safety edge or photocells does not offer the protection expected today.

If your operator has failed and the door is stuck, start with an industrial door repair: the technician gets the door working or makes it safe, then suggests the most suitable replacement.

Which doors can be automated?

We also work on high-speed door operators and on loading bay door / dock leveller interlocking, all makes.

How much does industrial door automation cost?

The price depends on the door, the motor and the safety devices needed: it is set out in a written quote after the survey.

A free site survey and an itemised quote. Motor, control panel, controls and safety devices are listed separately.

  • The weight and size of the door, which determine the motor’s power.
  • The operating mode: automatic closing needs more safety devices than hold-to-run control.
  • The controls chosen: radar, floor loop, badge or remotes.
  • The door’s condition: rebalancing or parts to change before motorising.

Where do we automate industrial doors in Normandy?

On logistics and industrial sites across the region: Le Havre, Rouen, Caen, Évreux, Cherbourg. A power-operated door in a workplace must then be inspected at least every six months: see our industrial door maintenance. All our solutions are on the industrial doors page.

Google reviews

What our customers say

Reviews are shown in their original language (French).

5.0
★★★★★
“Excellent” · 5 Google reviews
★★★★★
« Intervention rapide et très professionnelle. Dépanneur efficace, ponctuel et honnête sur les tarifs. Porte sectionnelle réparée rapidement et proprement. »
Khalid R.Google review
★★★★★
« Dépannage rapide ! Bon prix, très aimable et accessible. »
Emilie R.Google review
★★★★★
« Le monsieur est un professionnel, le travail est minutieux, je vous le recommande. »
Hassan I.Google review

All customer reviews See our Google profile

Frequently asked questions

Industrial door automation: your questions

Can a motorised industrial door be opened during a power cut?

Yes, if the motor has a manual override (chain, crank or release). We show your staff how to use it at commissioning. If it does not work, call us rather than forcing it.

Is a safety edge compulsory?

It is one of the devices that allow a door to meet EN 12453 once it closes without the operator holding the control. The exact choice of safety devices depends on the operating mode selected.

My door reopens by itself while closing: is it the motor?

Rarely. It is usually a safety device detecting an obstacle: a dirty or misaligned photocell, a damaged safety edge, a torn spiral cable. Clean the photocell lenses, then call if the fault persists.

Can the door be linked to the site’s access control?

Yes. The control panel generally accepts external contacts: badge reader, intercom, keypad or vehicle detection loop. Compatibility is checked during the survey.

Does your industrial door deserve a reliable operator?

A technician comes to see the door, checks its condition and recommends the right motor and safety devices.