Technicians available now Call-outs across Normandy 24 hours a day, 7 days a week Price given on site, before any work
5.0 on Google
Technicians available now · 24/7

Broken or bent roller shutter slats? We replace only what is damaged.

A broken roller shutter slat can usually be replaced on its own, without changing the whole curtain. After a vehicle impact, a break-in, wear or corrosion, DEPANN'Rideaux puts the shutter back in its guide rails, secures the premises if needed and replaces the damaged solid or micro-perforated slats, anywhere in Normandy. The technician gives you the price on site, after the diagnosis and before any work starts.

  • 24/7nights and bank holidays
  • Price given on sitebefore any work
  • All brandsparts in stock

Request a call-out

Quick reply, 7 days a week
What do you need?
Add a photo (optional)

Your details stay confidential.

A slat is bent or broken: what should you do straight away?

It is by operating the shutter that the damage spreads. These five steps limit it.

  1. Do not raise the shutter again. Each time a distorted slat passes through the guide rails it can catch, bend the next slat or tear off a fixing.
  2. Switch off the power if the motor is straining. A motorised shutter that struggles or squeaks should be switched off at the circuit breaker.
  3. Clear the area under the shutter. Move goods, display stands and passers-by away: a curtain out of line can come down crooked.
  4. Take photos close up and from a distance. One overall view, then each damaged slat. Note whether the slats are solid or micro-perforated, or whether it is a grille.
  5. Call +33 7 68 20 39 55. Describe the fault and send the photos: the technician works out how many slats to plan for and which profile to bring, and tells you when he can be there.
Do not straighten a slat with a hammer and do not pull on a slat that has come out of its guide rail. The curtain is heavy and still connected to the axle and springs: it can suddenly unroll.

Why does a roller shutter slat break?

A slat breaks or bends because of a knock, a break-in, worn fixings or corrosion. The cause tells us whether the rest of the curtain is sound.

Vehicle impact

A delivery lorry, a badly parked car, a forklift: the impact dents the lower slats and can warp a whole section of the curtain.

Sign: a localised dent, scraped paint, sometimes a guide rail bent at the same spot.

Attempted break-in

A crowbar slid under the bottom slat lifts the curtain and bends the slats inwards.

Sign: bottom slat lifted, tool marks, damaged lock. See shutter forced after a break-in.

Worn fixings

The slats interlock with one another. With daily use, the joints work loose and a slat eventually comes apart from the rest.

Sign: a hanging slat, a banging noise each time it opens.

Corrosion

Salty sea air on the coast and water standing at the foot of the shutter attack the steel, especially the lower slats and the bottom slat.

Sign: rust bubbling under the paint, a slat that is holed or brittle.

Why does a curtain out of line rub in the guide rails?

A curtain out of line rubs because a distorted slat is no longer perfectly straight: its ends no longer slide in the centre of the guide rails and pull the whole shutter crooked. Signs: a metallic scraping, jerky descent, the shutter higher on one side.

Leaving it to rub wears the guide rails, makes the motor strain until its thermal cut-out trips, and ends up jamming the shutter. If that has already happened, see our pages shutter stuck open and motor failure.

Should you replace only the damaged slats or the whole curtain?

In most cases, only the damaged slats are replaced: a curtain comes apart slat by slat. Changing the whole thing is only justified when the shutter is weakened throughout.

What we findMost suitable solution
One or a few slats dented, the rest of the shutter straight and soundReplacing the slats concerned
Bottom slat bent or torn offReplacing the bottom slat and checking the locking
Guide rail bent by the same impactSlats and a section of guide rail, see axle, springs and guide rails
Rust spread across the whole curtain, slats holed at several heightsReplacing the curtain
An old shutter whose motor or springs are also wornAssessing a full replacement

On site, after the diagnosis, the technician sets out the options and their prices before any work. Full details of the service are on our roller shutter slat replacement page.

Solid or micro-perforated slats: is the replacement different?

Yes: a replacement slat must match the profile, height, thickness and finish of the neighbouring slats exactly, otherwise it will not interlock or it will stand out. On site, the technician takes these measurements before ordering or fitting the part.

  • Solid slats: the profile is the main criterion. The most common ones are often available quickly.
  • Micro-perforated slats: the perforation pattern must match, so that the shop window stays visible and the new slat does not stand out.
  • Tube and link grilles: rather than a slat, we change the bent tubes and links, which can also be done one at a time.

How is a broken slat replaced?

It is done in four stages, usually without removing the shutter box.

  1. 1Back in the rails, or making safeIf the shutter is stuck or out of line, the technician first puts it back in position so the premises can be closed.
  2. 2Freeing the damaged slatsThe curtain is released from the guide rails at the right height, then the damaged slats slide sideways out of the assembly.
  3. 3Fitting the new slatsThe new slats interlock in place of the old ones, with their guide end caps.
  4. 4Checks and testingGuide rails checked, full raising and lowering, lock or bolts closed.

If the profile is not in the van, the shutter is closed and secured while the part is on its way. See making your shop secure.

How much does it cost to replace a roller shutter slat?

The price depends on the number of slats, their profile and access to the shutter.

Price given on site, before any work starts. Your photos help the technician bring the right slats. Once on site, he carries out the diagnosis and gives you the price: nothing is done without your agreement. Note that if you decline the work after the diagnosis, only the call-out is charged. You receive a detailed invoice at the end. How the price of a repair is set.

What makes the price vary?

  • The number of damaged slats: each extra slat changed during the same visit is added to the first.
  • The profile and finish: a micro-perforated slat, a bottom slat or a slat lacquered in a specific colour does not cost the same as a galvanised solid slat.
  • The condition of the curtain and guide rails: a curtain out of line that has to be put back in its rails, or a guide rail bent by the same impact, adds work.
  • The time of day: a call-out at night, on a Sunday or on a bank holiday carries a surcharge.
  • The distance: the call-out charge depends on the distance from our base in Gruchet-le-Valasse and is given to you together with the price of the job.

Where do you replace roller shutter slats?

Anywhere in Normandy. On the coast, in Le Havre and Dieppe, corrosion of the lower slats is a common reason for replacement. In the town centres of Rouen and Caen, it is more often knocks from deliveries and attempted break-ins.

To prevent wear, read our guide looking after your roller shutter. Every other fault is on the emergency roller shutter repair in Normandy page.

Google reviews

What our customers say

Reviews are shown in their original language (French).

5.0
★★★★★
“Excellent” · 5 Google reviews
★★★★★
« Intervention rapide et très professionnelle. Dépanneur efficace, ponctuel et honnête sur les tarifs. Porte sectionnelle réparée rapidement et proprement. »
Khalid R.Google review
★★★★★
« Dépannage rapide ! Bon prix, très aimable et accessible. »
Emilie R.Google review
★★★★★
« Le monsieur est un professionnel, le travail est minutieux, je vous le recommande. »
Hassan I.Google review

All customer reviews See our Google profile

Frequently asked questions

Broken or bent slats: your questions

Can a bent slat be straightened instead of replaced?

Sometimes, if the distortion is slight and the slat is neither cracked nor folded at a sharp angle. Once straightened, it must slide freely in the guide rails; if not, replacing it is safer and longer lasting.

Can I still close my shutter with a broken slat?

Avoid it if the slat catches or the shutter comes down crooked: you risk jamming it halfway. Call us before closing time, and we will put the curtain back in its rails or secure the premises.

Can you find compatible slats for an old shutter?

In most cases, yes, based on the profile measured on site. If the model is no longer made, we suggest replacing a section or the curtain, with the price given on site before any work starts.

A vehicle hit my shutter: will the insurance pay for the slats?

That depends on your policy and on whether the driver is identified. Take the driver’s details if you can and let your insurer know. We give you a detailed invoice and photos of the damage.

How long does it take to change a roller shutter slat?

Allow 1 to 2 hours for a standard slat carried in the van, then +15 min for each extra slat. For a profile that has to be ordered, the lead time is 3 to 5 working days for a standard slat, 2 to 3 weeks for a lacquered or special slat: the shutter is secured on the day of the visit and fitting is scheduled when the part arrives.

A broken slat on your roller shutter?

Stop operating the shutter. Send a photo so the technician brings the right slats: he gives you the price on site, before any work starts.