Will my garage door take a motor?
Almost any garage door can be motorised, on one condition: it must be well balanced and in good condition. A motor is not designed to lift a heavy door; it moves a door whose weight is offset by springs or counterweights. If a manual door is hard to lift, drops on its own or hangs crooked, it must be adjusted or repaired first.
That is why every motorisation starts with an on-site check: springs and cables, how the door runs in its tracks, locking, and the strength of the ceiling or wall supports. If the door is too worn, repairing and then motorising it can cost more than a made to measure garage door supplied with its motor: the technician will tell you straight.
Which garage door motor for which type of door?
The motor is chosen according to how the door opens, its weight and the space in the garage.
| Door type | Usual motor | To check |
|---|---|---|
| Sectional | Ceiling-mounted rail motor (chain or belt), or a motor mounted on the spring shaft | Ceiling space, spring balance |
| Roller | Tube motor inside the barrel | Barrel diameter, door weight |
| Up-and-over | Ceiling-rail motor with a suitable arm | Type of up-and-over (canopy or retractable), lock to disable |
| Side-sliding | Side or rail motor, depending on the guiding | Length of travel, track condition |
The exact model (power, drive) is stated on the quote after the survey. We fit motors from the major brands on the market and work on existing motors of all brands.
How do we motorise an existing garage door?
- 1Survey and door checkBalance, springs, cables, tracks, locking, power supply: the technician checks the door can take a motor.
- 2Choosing the motor and controlsA motor suited to the door’s type and weight, number of remotes, wall button, keypad or key switch.
- 3PreparationAdjusting or repairing the door if needed, disabling the manual lock that would block the motor.
- 4Fitting and connectionFixing the motor and rail, connecting to a suitable power supply, fitting the photocells.
- 5Adjustment and testsLimit switches, obstacle-detection force, safety tests, remote programming, demonstration of the manual release.
When should you replace your garage door motor?
Replace the motor when repair is no longer sensible: a dead control board that is no longer made, a worn gear motor, repeated breakdowns or a motor too weak for the door. Before deciding, the technician always looks for a simpler cause: thermal cut-out, limit switches out of adjustment, dirty photocells, slack belt, a remote that has lost its programming. Those faults are a job for garage door repair.
A motor that strains is also often a sign of a tired spring. Replacing the motor without rebalancing the door solves nothing: the new motor will wear out as fast as the old one.
How do I add or reprogramme a garage door remote?
An extra remote is programmed onto the motor’s receiver, provided it is compatible. If a remote is lost or stolen, the safest option is to erase all stored remotes and reprogramme only the ones you keep: the missing one can no longer open the garage.
Depending on the motor, other controls are possible: wall button, outdoor keypad, key switch, or smartphone control on connected models. We also fit connected motors that work with a home automation system.
What safety devices does a motorised garage door need?
A motorised door must stop and reverse as soon as it meets an obstacle. Standard EN 12453 sets the safety-in-use requirements for power-operated doors, in particular limiting the forces applied on contact.
These devices are set at fitting and checked afterwards: now and then, pass your hand through the beam while the door is closing. Never try to adjust the springs or take the motor apart yourself: they carry mechanical and electrical energy.
Does Normandy’s climate damage garage door motors?
Damp is the enemy of electronics: in a cold, poorly ventilated garage, common in Normandy, condensation can corrode boards and receivers. Storms also cause power surges that burn out radio receivers. On the coast, salt air attacks tracks and fixings. A motor fitted away from water splashes, a protected power supply and regular greasing of the moving parts make it last much longer.
How much does a garage door motor cost?
The price depends on the door type, the motor, the controls and the door’s condition: it is set in a written quote, after the survey.
Free site survey and quote. The survey is free; the quote separates the motor, accessories, fitting and any repair to the door. For a broken motor needing urgent repair, the technician gives you the price on site, after the diagnosis and before any work starts.
Where do we fit garage door motors?
Across Normandy, including Le Havre, Rouen, Caen and Évreux. For a new door supplied with its motor, see garage door installation. All our doors for the home are on the residential doors page. For a shop, see roller shutter motors.
